User manual

If the drying results are not
satisfactory we suggest that you:
1. Fill up the rinse aid dispenser
with rinse aid.
2. Activate the rinse aid dispenser.
3. Set the rinse aid dosage to posi-
tion 2.
If you decide to revert back to the
use of individual detergents we ad-
vise that you:
1. Deactivate the Multitab function.
2. Fill up the dispensers for salt and
rinse aid again.
3. Adjust the water hardness set-
ting to the highest setting and
perform 1 normal washing pro-
gramme without loading any
dishes.
4. Adjust the water hardness set-
ting according to the hardness of
the water in your area.
5. Adjust the rinse aid dosage.
Select and start a washing programme
1. Check that the baskets have been
loaded correctly and that the spray
arms are free to rotate.
2. Check that the water tap is opened.
3. Press the On/Off button.
The last performed washing pro-
gramme will be automatically selec-
ted.
4. Close the dishwasher door.
5. Select the washing programme (see
"Washing programmes" chart).
Press OK to confirm.
6. If required, postpone the start of the
programme (delay start). Press OK
to confirm.
7. Set, if required, the options.
8. Press start button, the washing pro-
grammes starts automatically.
If after the start button has been
pressed, one or both of the salt/
rinse aid messages appear in dis-
play, the programme will not start.
Press OK to start the programme.
select and start a washing programme electrolux 23