D i s h w a s h e r INSTRUCTION BOOK COP04 Model ESL 414 152991 78/0 0/0398 GB
Important safety information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. This information has been provided in the interest of safety.
Contents For the user For the installer Important safety information 2 Guide to use the instruction book 3 Description of the appliance 4 The control panel 5 Before use Setting the water softener Rinse aid Use of detergent 6 6 8 9 Using your appliance Loading your appliance Adjusting the height of the upper basket 10 10 11 Hints and tips 12 Washing programmes 13 Operating sequence 14 Maintenance and cleaning Internal cleaning Cleaning the central filters Cleaning the large filter Externa
Description of the appliance Water hardness adjustment Upper basket Levelling spacers Upper basket stop Upper spray arm Large filter Lower spray arm Central filters Salt container Rinse aid dispenser Cutlery basket Detergent dispenser Rating plate Lower basket Control panel IN45 4 PDA01UK
The control panel 1 2 3 4 3. Programme marker In this fully integrated appliance the controls are located on the top of the door. When selecting a programme, the door needs to be open. 4. Programme selector 1. On/Off pushbutton To select a programme, rotate the programme selector to the right (clockwise), making sure that the programme letter you wish to select corresponds with the programme marker on the control panel. Depress this button to switch the dishwasher on.
Before use Before using your dishwasher for the first time: ☞ ensure that the electrical and water connections comply with the installation instructions ☞ remove all packaging from inside the appliance ☞ set the water softener ☞ fill the salt container ☞ fill the rinse aid dispenser. Setting the water softener The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.
Filling with salt Salt must be used from level 2 upward. Only use salt specifically designed for use in dishwasher. All other types of salt not specifically designed for use in dishwasher, specifically table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes (not the Rinse and Hold programme).
Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Filling with Rinse Aid: 1. Open the container by turning the lid (A) anticlockwise. A 2. Add the rinse aid until the container is completely full (approx. 110 ml). The indicator (B) will be completely dark.
Use of detergent Only use detergents specifically designed for use in dishwashers. D We recommend the use of Finish detergents which are available in the following options: Finish Double Action Tablets. Each tablet has the exact amount of detergent required, simply place in the dispenser. Finish Powder recommended for every day use. Finish liquid Gel ideal for every day use. As the gel is extra gentle is it recommended for fine bone china.
Using your appliance Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. Open the door and slide out the baskets to load the dishes. The lower basket The lower basket is designed to take saucepans, lids, plates (up to 27 cm in diameter), salad bowls, cutlery etc.
The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses; Glasses with long stems can be placed upside down in the raised cup racks. Larger plates (dinner plates up to 24 cm in diameter) must be loaded in the front part of the upper basket. Light items (plastic bowls etc.) should be loaded in the upper basket and arranged so they do not move.
Hints and tips To save energy Items not suitable for dishwashers: Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. The following items should not be washed in the dishwasher (unless they are sold as dishwasher proof): If necessary run the Rinse and Hold programme (see "Washing Programmes" chart on the following page), so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme.
Washing programmes Programme * POWER WASH 65°C Heavy soil. Crockery, cutlery pots and pans NORMAL WASH 65°C Normal soil. Crockery and cutlery ** ECO Normal soil. Crockery and cutlery WASH 65°C RINSE AND HOLD * Degree of soil and type of load Any. Partial load (to be completed later in the day).
Operating sequence 1. Check the filters 8. Start the programme Ensure they are clean and properly positioned (see cleaning instructions). Depress the On/Off pushbutton and close the door; the machine will start. 2. Check that there is rinse aid and salt 9. At the end of the washing programme At the end of the washing programme the dishwasher stops automatically. 3. Load the dishes 10. Switch off the dishwasher Remove any scraps of food.
Maintenance and cleaning Internal cleaning Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent. Regular use of Finish Dishwasher Cleaner cleans inaccessible parts, eliminates unpleasant food odours and helps prevent the build-up of limescale.
External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Prolonged periods of nonoperation If you are not using the machine for any period of time you are advised to: 1. Unplug the appliance and then turn off the water; 2. Fill the rinse aid dispenser; 3. Leave the door ajar to prevent the formation of any unpleasant smells; 4.
Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. Symptom Solution The machine will not start ■ ■ ■ ■ The dishwasher does not fill with water ■ ■ ■ ■ The filters are blocked The dishwasher will not drain Ensure the water tap is open. Ensure the mains water supply has not been cut off.
If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. This information can be found on the rating plate located on the right hand side of the dishwasher door (see picture). Service and spare parts Prod.No. ........ Ser. No. ......... Mod. ........
Guarantee Conditions Standard guarantee conditions We, Electrolux, undertake that if within 12 months of the date of purchase this Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: • The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
ELECTROLUX SERVICE FORCE To contact your local Electrolux Service Centre telephone CHANNEL ISLANDS GUERNSEY Guernsey Electricity PO Box 4 Vale, Guernsey Channel Islands JERSEY Jersey Electricity Company PO Box 45 Queens Road St Helier Jersey Channel Islands JE4 8NY SCOTLAND ABERDEEN (M5) 8 Cornhill Arcade Cornhill Drive Aberdeen AB2 5UT AUCHTERMUCHY 33A Burnside (M03) Auchtermuchy Fife KY14 7AJ BLANTYRE (M07) DUMFRIES (M01) Unit 5 Block 2 Auchenraith Ind Estate Rosendale Way Blantyre G72 0NJ 93Irish
ELECTROLUX SERVICE FORCE To contact your local Electrolux Service Centre telephone MIDLANDS BIRMINGHAM (M18) BOURNE (M44) BRIDGNORTH (M72) GLOUCESTER (M23) 66 Birch Road East, Wyrley Road Industrial Estate Witton Birmingham B6 7DB Manning Road Ind Estate Pinfold Road Bourne PE10 9HT 1 Underhill Street Bridgnorth Salop WV16 4BB 101 Rycroft Street Gloucester GL1 4NB Unit 3 Bank Buildings Cattle Market Hereford HE4 9HX HIGHAM FERRERS The Old Barn (M51) Westfield Terrace Higham Ferrers NN10 8BB ILKESTON Uni
Installation instructions Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.
Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain. Water supply connections This dishwasher must be plumbed into a cold water supply. The water pressure must be within the limits given in the technical specifications. Your local Water Authority will advise you on the average mains pressure in your area. The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation.
Water outlet hose connection The end of the drain hose can be connected in the following ways: A- To the sink outlet siphon, securing it if necessary with a clip. B- To a wall outlet provided with a vent-hole, minimum internal diameter 4 cm. B min 4 cm C Ø 18 Ø 21 Ø Ø Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.
Electrical connection This appliance must be earthed. The manufacturer declines any responsibility should this safety measures not be observed. If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.
Building-in 446 55a5x m 820 ÷ 880 450 818 ÷ 878 This dishwasher is designed to be fitted under a kitchen counter or worksurface. It is essential that the recess dimensions indicated in the diagram are followed. No further openings for venting of the dishwasher are required, but only to let the water fill and drain hose and power supply cable pass through. It is absolutely essential that the dishwasher is disconnected from the electricity supply before gaining access to any internal component.
The furniture door 446 max * The panel height should be no more than indicated, otherwise complete opening of the door will no longer be possible as the panel hits against the dishwasher plinth. 360 * 30 446 mm 664 - 714 mm max 20 mm max 1.5 - 6 kg max II27 30 40 = Mounting the furniture door onto the door The height of the panel depends on the height of adjacent kitchen units (see kitchen plinth adjustment).
Adjusting the door balance After the door panel, the adjustment of the door balance may be necessary. The door of the dishwasher is balanced when it is open in any position. For this purpose use the two front screws. Open the door, remove the caps and screw or unscrew the screws. In this way the tension of the door balancing springs is increased or decreased respectively. Insert the caps again.
Kitchen plinth adjustment To allow correct opening of the door it is sometimes necessary to cut the kitchen plinth. Refer to the cutting table. According to dimensions (a) and (b) as shown on the figure, you will find on the following table the depth (x) of the cut to be made on the plinth. The dimensions (a) and (b) of the table are those most frequently used in the kitchen furnitures.