User manual

22
Starting a dishwashing cy-
cle
1. Check that the spray arms can turn freely.
2. Turn the water tap on fully.
3. Press the ON/OFF button.
4. Select the desired cycle. In addition, press the cy-
cle selection button repeatedly until the desired cy-
cle is displayed in the multi-display (see cycle
table).
5. Close the door. The dishwashing cycle will begin.
Interrupting or aborting a dish-
washing cycle
Only interrupt a dishwashing cycle that is in progress
if it is absolutely necessary.
Interrupting the dishwashing pro-
gramme by opening the dishwasher door
1 Hot steam may escape when the door is
opened. There is a risk of scalding.
1. Open the door carefully. The dishwashing cycle will
stop.
2. Close the door. The cycle will continue.
Aborting the dishwashing cycle
1. Press function buttons 2 and 3 and keep them
pressed.
Two lines are displayed in the multi-display.
2. Release the function buttons. The dishwashing cy-
cle has been cancelled.
3. If you want to start a new cycle, check whether
there is any detergent in the dispenser.
Additional functions
Half load
Can be selected with the cycles: INTENSIVE, NOR-
MAL
Select this additional function when there are only
half the number of dishes.
1. After selecting the cycle, press the Half load but-
ton.
When the cycle has finished, the Half load function is
automatically switched off again.
Antibac
Can be selected with the cycles: AUTO, INTENSIVE,
NORMAL, QUICK
This additional function makes it possible to thor-
oughly disinfect items such as baby bottles or jam
jars. In the last rinse cycle the temperature will now
be held at over 69 °C for at least 10 minutes.
1.After selecting the cycle, press the Antibac button:
When the cycle has finished, the Antibac function is
automatically switched off again.
Rinse +
Can be selected with the cycles: AUTO, GLASSES,
INTENSIVE, NORMAL, ECO, QUICK
If this additional function is selected, a second inter-
mediate rinse is performed.
1.After selecting the cycle, press the Rinse + button:
When the cycle has finished, the Rinse + additional
function is automatically switched off again.
Indicator Half load is
lit:
Additional function
switched on
Indicator Half load is
not lit:
Additional function
switched off
Indicator Antibac is lit:
Additional function
switched on
Indicator Antibac is
not lit:
Additional function
switched off
Indicator Rinse + is lit: Rinse + activated
Indicator Rinse + is
not lit:
Rinse + deactivated