User manual

38
14.Fix the appliance laterally by tightening screw V.
To do this, there are 2 oblong holes to the right and
left in the hinge support to allow access for the
screwdriver.
Connection to the electri-
cal supply
Installation must be via a mains cable with a plug.
The plug must be accessible after the installation, or
a separation device with at least a 3 mm contact gap
must be provided in the permanent house wiring that
gives the appliance simultaneous all-pole separation
from the electrical supply.
House’s electrical system:
Install fuse, mains cable and socket in accordance
with the electrical schematic.
Wiring:
Heating element voltage 230 V