User manual

8
3. Press function button 1.
The LED indicator for function button 1 will flash.
The multi-display will indicate the hardness setting.
4. Pressing function button 1 increases the hard-
ness setting by 1.
(Exception: hardness setting 1 follows hardness
setting 10).
5. When the hardness setting is correct, press the
ON/OFF button.
The hardness setting is now saved.
If the water softener is set electronically to “1”, this
switches off the control indicator for special salt.
Water hardness
Adjusting the hardness set-
ting
Indication on the multi-dis-
play
in °fh
1)
)in °dh
2)
)
90 - max. 125
76 - 89
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
07 - 18
51 - max. 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
10
3)
9
8
7
6
5*
4
3
2
10L .
9L
8L
7L
6L
5L
4L
3L
2L
below 7 below 4
1
no salt necessary
1L
1) (°fh) French degree, measure of the hardness of water
2) (°dh) German degree, measure of the hardness of water
3) On this setting the length of the dishwashing cycle may be slightly longer.
*) factory setting