User manual

7. Using the drilling template supplied, mark out and

drill 8 holes b for the two guides (ø2 mm, 12 mm

deep) at the top of the hinged door. To do this,

align the drilling template with the top edge of the

hinged door.

8. Screw the hinges (using 4 countersunk head wood

screws, not supplied) and the guides (using 8 Spax

screws 4.0x20, pozidrive) to the hinged door.

9. Snap the hinges on the hinged door into the bot-

tom units of the hinges. Hold the hinged door care-

fully, so that the hinges are not bent.

10.Adjust the hinges using the screws A, B and C to

match the kitchen unit (width of gap, etc.)