User manual

12
Activating/deactivating the inflow
of rinse aid
1. Press the ON/OFF button.
3 If indicators other than the cycle selection but-
ton are lit, a dishwashing cycle is activated.
The dishwashing cycle must be deselected:
Press function buttons 2 and 3 simultaneously
for approx. 2 seconds.
All other indicators will go out.
2. Press function buttons 2 and 3 simultaneously and
keep them pressed.
The LED indicators for function buttons 1 to 3 will
flash.
3. Press function button 2.
The LED indicator for function button 2 will flash.
The multi-display will indicate the current setting:
4. Pressing function button 2 activates and deacti-
vates the rinse aid dispensing function.
5. Once the multi-display is indicating the required
setting, press the ON/OFF button. The setting is
now saved.
Activating/deactivating the
acoustic signal
In addition to the optical display (e.g. indicating the
end of the cycle, errors) you can also choose to set
an acoustic signal.
1. Press the ON/OFF button.
3 If indicators other than the cycle selection but-
ton are lit, a dishwashing cycle is activated.
The dishwashing cycle must be deselected:
Press function buttons 2 and 3 simultaneously
for approx. 2 seconds.
All other indicators will go out.
2. Press function buttons 2 and 3 simultaneously and
keep them pressed.
The LED indicators for function buttons 1 to 3 will
flash.
3. Press function button 3.
The LED indicator for function button 3 will flash.
The multi-display will indicate the current setting:
4. Pressing function button 3 will change the setting.
5. Once the multi-display is indicating the required
setting, press the ON/OFF button. The setting is
now saved.
0d Inflow of rinse aid is deactivated
1d
Inflow of rinse aid is activated (fac-
tory setting)
0b Acoustic signal deactivated
1b
Acoustic signal activated (ex-facto-
ry setting)