User manual

Function push buttons: in addition to the dishwashing
programme selected, the following functions can also be set
with the help of these buttons:
- water softener setting,
- deactivation/activation of the inflow of rinse aid,
- the cancelling of a washing programme in progress,
- deactivation/activation of the audible signals.
Programme selection push buttons: allows the
selection of the desired washing programme (see "Washing
programmes" chart).
Delay start option push button: this option allows the
start of the programme to be delayed by 3, 6 or 9 hours.
Half load option push button: this option is useful and
economical when only a few dishes need washing reducing the
consumption of water and energy. This option must be linked
to the selection of a washing programme.
The corresponding indicator light will illuminate.
Load the dishes into both baskets (lower basket and upper
basket).
With the selection of this option, the prewash phase is
automatically excluded with programmes Intensive 70°C and
Normal 65°C. (In this case the detergent dose for the prewash
phase is no longer necessary).
The duration of the washing phase with programme Bio 50°C
will be reduced.
With programme Rinse and Hold it is not possible to select
the half load option (Push button deactivated - indicator light
off).
When using this option we recommend to reduce the dose of
detergent that is normally used for a complete load.
The control panel
6
1. Upper basket stop
2. Water hardness switch
3. Salt container
4. Detergent dispenser
5. Control panel
6. Rating plate
7. Rinse aid dispenser
8. Filters
9. Lower spray arm
10. Upper spray arm
11. Upper basket
Description of the appliance
IN153
On/Off push button
Indicator lights
Function
push buttons
Programme selection
push buttons
Delay start
option push button
Half load
option push button