User manual

Water hardness
Water softener
adjustment
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l Clarke
degrees
Manual Elec-
tronic
29 - 36 51 - 64 5.1 - 6.4 36 - 45
2
1)
7
23 - 28 40 - 50 4.0 - 5.0 28 - 35
2
1)
6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
2
1)
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2
< 4 < 7 < 0.7 < 5
1
2)
1
2)
1)
Factory position.
2)
Do not use salt at this level.
You must adjust the water soften-
er manually and electronically.
Manual adjustment
Turn the water hardness dial to the posi-
tion 1 or 2.
6.2 Electronic adjustment
1.
Press the on/off button to activate the
appliance.
2. If necessary, do the Reset function.
3. Press and hold Program until the pro-
gramme indicator
starts to
flash and the programme indicator
comes on with fixed light.
4. Wait until the programme indicator
goes off and the end indicator
starts to flash. The programme indica-
tor
continues to flash.
5.
Press Program. The end indicator
starts to flash. The intermittent flashing
of the end indicator refers to the cur-
rent set level.
• E.g. 5 flashes + pause + 5 flashes =
level 5.
6.
Press Program again and again to
change the setting. Each time you
press Program the level number in-
creases.
7.
Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
22
www.electrolux.com