Manual

Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance. The indicator of the
programme comes on. The display
shows the duration of the programme.
3.
Set a programme.
•
If you want to start the
pro-
gramme, close the appliance door.
• If you want to set a different pro-
gramme, press the button of the
programme you want to set. The
display shows the duration of the
programme.
4. Close the appliance door. The pro-
gramme starts. The programme dura-
tion starts to decrease with steps of 1
minute.
Starting a programme with delay
start
1.
Set the programme.
2.
Press
again and again until the
display shows the delay time you want
to set (from 1 to 24 hours).
• The display shows the delay time.
•
The
indicator comes on.
3.
Close the appliance door. The count-
down starts.
• When the countdown is completed,
the programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while
the countdown operates
When you cancel the delay start you have
to set the programme and options again.
1. Press and hold, at the same time,
and until the
indicator comes on.
Cancelling the programme
1. Press and hold, at the same time,
and until the indica-
tor of
comes on.
Make sure that there is detergent
in the detergent dispenser before
you start a new programme.
At the end of the programme
When the programme is completed, the
display shows 0:00.
1.
Press the on/off button or wait for the
Auto Off function to automatically de-
activate the appliance.
2.
Close the water tap.
Important
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.
8. HINTS AND TIPS
8.1 The water softener
Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these minerals.
The dishwasher salt keeps the water soft-
ener clean and in good conditions. It is
important to set the right level of the water
softener. This makes sure that the water
softener uses the correct quantity of dish-
washer salt and water.
ENGLISH 11