User manual

5. OPTIONS
Activate or deactivate the options
before the start of a program. You
cannot activate or deactivate the
options while a program operates.
If one or more options are set,
make sure that the related indica-
tors are on before the program
starts.
5.1 MyFavourite
With this option you can set and save the
program that you use more frequently.
You can only save 1 program at a
time. A new setting cancels the
previous one.
How to save a program
1.
Press the on/off button to activate the
appliance.
2. Set the program that you want to
save. You can also set applicable op-
tions together with the program. It is
not possible to save the option Delay.
3. Press and hold MyFavourite until the
related indicator comes on with fixed
light.
How to set the MyFavourite program
1.
Press MyFavourite. The indicators
that are related to the MyFavourite
program and options come on.
• The display shows the number and
the duration of the program.
5.2 TimeSaver
This option increases the pressure and
the temperature of the water. The wash-
ing and drying phases are shorter. The to-
tal program duration decreases by ap-
proximately 50%.
The washing results are the same as with
the normal program duration. The drying
results can decrease.
How to activate the TimeSaver option
1. Press TimeSaver. The related indica-
tor comes on. In the display you can
see the update of the program dura-
tion.
• If the option is not applicable to the
program, the related indicator flash-
es quickly 3 times and then goes
off.
5.3 Multitab
Activate this option only when you use
multi-tablets.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The program duration can increase.
How to activate the Multitab option
1.
Press Multitab, the related indicator
comes on.
If you stop to use the multi-tablets,
before you start to use separately
detergent, rinse aid and dishwasher
salt, do these steps:
1. Set the water softener to the highest
level.
2. Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest program with a rins-
ing phase, without detergent and with-
out dishes.
4. Adjust the water softener to the water
hardness in your area.
5.
Adjust the released quantity of rinse
aid.
5.4 EnergySaver
This option decreases the temperature in
the last rinse phase.
The use of this option decreases the ener-
gy consumption (up to 25%) and the pro-
gram duration.
The dishes can be wet at the end of the
program.
How to activate the EnergySaver
option
1. Press EnergySaver. The related indi-
cator comes on. In the display you can
see the update of the program dura-
tion.
• If the option is not applicable to the
program, the related indicator flash-
es quickly 3 times and then goes
off.
ENGLISH 9