User manual

Settings Values Description
Water hardness From level 1 to level
10.
Set the level of the water
softener according to the
water hardness in your
area.
Factory setting: level 5.
Rinse aid level From level 0 to level
6.
Level 0 = no release
of rinse aid.
Set the level of the rinse
aid dispenser according to
the necessary quantity of
rinse aid.
Factory setting: level 4.
Languages List of languages. Set the preferred language.
Default language: English.
Display on floor List of colours. Set the colour of the Time‐
Beam
Reset settings Reset Reset the appliance to fac‐
tory settings.
6.2 How to change a setting
with 2 values (ON and OFF)
When a setting is changed it will remain
valid even if the programme is completed
or a running programme is cancelled.
1. Press the Option key.
2. Select Settings.
3. Press the OK key.
4. Select the setting to change.
5. Press the OK key to change the
value from ON to OFF or vice versa.
6. Press repeatedly the Option key until
the display shows the programme
list.
6.3 How to change a setting
with multiple values
When a setting is changed it will remain
valid even if the programme is completed
or a running programme is cancelled.
1. Press the Option key.
2. Select Settings.
3. Press the OK key.
4. Select the setting to change.
5. Press the OK key to enter the next
level.
6. Select the new value.
7. Press the OK key to confirm.
8. Press repeatedly the Option key until
the display shows the programme
list.
6.4 Starting the MyFavourite
programme
1. Press and hold OK for about 3
seconds until the display shows the
MyFavourite setting.
2. Close the appliance door to start the
programme.
6.5 How to save the
MyFavourite programme
You can only save 1 programme at a
time. A new setting cancels the previous
one.
1. Press the Option key.
2. Select Settings.
3. Press the OK key.
4. Select MyFavourite.
5. Press the OK key.
The display shows the programme list.
6. Select a programme.
7. Press the OK key.
8. The display shows Add option and
Done.
• Select Done if you want to save a
programme without options and
press the OK key.
www.electrolux.com34