ESL8530RO EN Dishwasher User Manual
www.electrolux.com CONTENTS 1. SAFETY INFORMATION....................................................................................2 2. SAFETY INSTRUCTIONS..................................................................................4 3. PRODUCT DESCRIPTION................................................................................ 6 4. CONTROL PANEL............................................................................................. 7 5. PROGRAMMES.....................................
ENGLISH 3 responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.
www.electrolux.com • • • • • • • Do not leave the appliance with the door open, to avoid a tripping hazard. Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam to clean the appliance. The appliance is to be connected to the water mains using the new supplied hose-sets. Old hose sets must not be reused. The ventilation openings in the base (if applicable) must not be obstructed by a carpet.
ENGLISH • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. 2.3 Water connection • • • • Do not cause damage to the water hoses. Before connection to new pipes, pipes not used for a long time, where repair work has been carried out or new devices fitted (water meters, etc.), let the water flow until it is clean and clear. Ensure that there are no visible water leaks during and after the first use of the appliance.
www.electrolux.com 3. PRODUCT DESCRIPTION 1 2 3 11 10 9 1 2 3 4 5 6 8 7 Top spray arm Upper spray arm Lower spray arm Filters Rating plate Air vent 3.1 Beam-on-Floor The Beam-on-Floor is a light that is displayed on the floor below the appliance door. • • • When the programme starts, a red light comes on and stays on for the duration of the programme. When the programme is completed, a green light comes on. When the appliance has a malfunction, the red light flashes.
ENGLISH 4. CONTROL PANEL 2 1 1 2 3 4 5 On/off button Display Delay button Program button MyFavourite button 3 4 6 7 8 9 5 7 6 8 9 TimeManager button XtraDry button Reset button Indicators 4.1 Indicators Indicator Description Rinse aid indicator. It is always off while the programme operates. 5.
www.electrolux.com Programme Degree of soil Type of load Programme phases Options P5 • Normal or light soil Delicate crock‐ ery and glass‐ ware • • • Wash 45 °C Rinse Dry • XtraDry • • Fresh soil Crockery and cutlery • • Wash 60 °C Rinse • XtraDry • All • Prewash • P6 P7 4) 5) 1) With this programme, you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. This is the standard programme for test institutes.
ENGLISH Programme 1) P7 Water (l) Energy (kWh) Duration (min) 4.0 0.01 14 9 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.2 Information for test institutes For all the necessary information for test performance, send an email to: info.test@dishwasher-production.com Write down the product number (PNC) that is on the rating plate. 6. SETTINGS 6.
www.electrolux.com 1. Press . • The indicators off. , and are • • still flashes. The indicator The display shows the current setting. – = the rinse aid empty notification is deactivated. – = the rinse aid empty notification is activated. How to activate the acoustic signal for the end of programme Make sure the appliance is in user mode. . 1. Press 2. Press to change the setting. 3. Press the on/off button to confirm the setting. 6.
ENGLISH – CAUTION! Do not try to close the appliance door within 2 minutes after automatic opening. This can cause damage to the appliance. If, afterwards, the door is closed for another 3 minutes, the running programme ends. – 6.6 MyFavourite This option allows to set and save the most frequently used programme. (if To improve the drying performance refer to the XtraDry option or activate AirDry.
www.electrolux.com How to activate TimeManager Press . The related indicator is on. The display shows the updated programme duration. automatically used in next cycles. This configuration can be changed at any time. Every time is activated, XtraDry is off and needs to be chosen manually. 7.2 XtraDry Activate this option to boost the drying performance. With XtraDry on, the duration of some programmes, water consumption and the last rinse temperature can be affected.
ENGLISH 13 9. DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode. • If the rinse aid empty message is shown fill the rinse aid dispenser. 3. Load the baskets. 4. Add the detergent. 5. Set and start the correct programme for the type of load and the degree of soil. 9.1 Using the detergent A B automatically the appliance when it is not operating.
www.electrolux.com Opening the door while the appliance operates Opening the door while a programme is running stops the appliance. It may affect the energy consumption and the programme duration. After closing the door, the appliance continues from the point of interruption. If the door is opened for more than 30 seconds during the drying phase, the running programme ends. It does not happen if the door is opened by AirDry function.
ENGLISH • • • • • • • • • • Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. Do not put in the appliance items that can absorb water (sponges, household cloths). Remove remaining food from the items. Make soft the remaining burned food on the items. Put hollow items (cups, glasses and pans) with the opening down. Make sure that cutlery and dishes do not bond together. Mix spoons with other cutlery. Make sure that glasses do not touch other glasses.
www.electrolux.com 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4. Wash the filters. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.2 Cleaning the upper spray arm We recommend to clean regularly the upper spray arm to avoid soil to clog the holes. 5.
ENGLISH 17 11.3 External cleaning • • • Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads or solvents. 11.4 Internal cleaning • 3. Wash the spray arm under running water. Use a thin pointed tool, e.g. toothpick, to remove particles of soil from the holes. • • • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth.
www.electrolux.com WARNING! Repairs not properly done may result in serious risk to the safety of the user. Any repairs must be performed by qualified personnel. With some problems, the display shows an alarm code. The majority of problems that can occur can be solved without the need to contact an Authorised Service Centre. Problem and alarm code Possible solution You cannot activate the appliance. • The programme does not start. • • Make sure that the appliance door is closed.
ENGLISH Problem and alarm code Possible solution Small leak from the appli‐ ance door. • The appliance door is diffi‐ cult to close. • Rattling/knocking sounds from inside the appliance. • 19 The appliance is not levelled. Loosen or tighten the adjustable feet (if applicable). The appliance door is not centred on the tub. Adjust the rear foot (if applicable). • The appliance is not levelled. Loosen or tighten the adjustable feet (if applicable).
www.electrolux.com Problem Possible cause and solution There are whitish streaks or • bluish layers on glasses and dishes. • The release quantity of rinse aid is too much. Ad‐ just the rinse aid level to a lower level. The quantity of detergent is too much. There are stains and dry wa‐ • ter drops on glasses and dishes. • The released quantity of rinse aid is not sufficient. Adjust the rinse aid level to a higher level. The quality of the rinse aid can be the cause. The dishes are wet.
ENGLISH 21 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 550 Electrical connection 1) Voltage (V) 200 - 240 Frequency (Hz) 50 / 60 Wattage (W) 1550-2200 bar (minimum and maximum) 0.5 - 8 kPa (minimum and maximum) 50 - 800 Cold water min 5 °C Place settings 15 Water supply pressure Water supply 2) Capacity 1) Refer to the rating plate for other values. 2) Cold water connection is recommended for best washing performance. 14.
www.electrolux.com 14.1 Adjusting the height of the appliance 1. Remove the adjustable plinth. 14.3 Water inlet hose Connect the inlet hose to a water tap with an external BSP thread spout of 3/4''. For best washing performance it is recommended to connect the appliance to a cold water supply. 2. To adjust the front height of the appliance, turn the 2 front feet counterclockwise. 3. To adjust the rear height of the appliance, turn the middle screw counterclockwise. 14.
ENGLISH 23 Remove the sink plug when the appliance drains the water to prevent that the water goes back into the appliance. The appliance has a security feature to prevent dirty water going back into the appliance. If the spigot of the sink has a non-return valve, this valve can cause the appliance to drain incorrectly. remove the non-return valve. 14.4 Water drain hose If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane.
Warranty FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: ELECTROLUX DISHWASHERS This document sets out the terms and conditions of the product warranties for Electrolux Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should there be a manufacturing defect in your Appliance. This warranty is in addition to other rights you may have under the Australian Consumer Law. 1.
117880011-A-232018 www.electrolux.
