ESV09CRS-B2 ESV12CRS-B2 ESV09CRR-C6 ESV09CRR-C7 EN AIR CONDITIONER ESM09CRR-B3 ESM12CRR-B3 ESM18CRR-B3 USER MANUAL 2
www.electrolux.com CONTENTS 1. SAFETY INSTRUCTIONS..................................................................................... 3 2. PRODUCT DESCRIPTION.................................................................................... 5 3. INDOOR UNIT DISPLAY....................................................................................... 6 4. REMOTE CONTROLLER...................................................................................... 6 5. REMOTE CONTROLLER DESCRIPTION........
ENGLISH 1. 3 SAFETY INSTRUCTIONS Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.electrolux.com • For safety, be sure to turn off the circuit breaker before performing any maintenance or cleaning or when the product is not used for an extended period of time. Accumulated dust may cause re or electric shock. • Select the most appropriate temperature. It can save electricity. • Do not keep windows and doors open for a long time during operation. It will result in insuf cient performance. • Do not block the air inlet or outlet.
ENGLISH 5 2. PRODUCT DESCRIPTION All the pictures in this manual are for explanation purposes only. The actual shape of the indoor unit you purchased may be slight different on front panel and display window. The actual shape shall prevail.
www.electrolux.com 3. INDOOR UNIT DISPLAY 1 2 4 3 3 2 5 1 4 5 6 7 4 1 On/Off indication lamp Lights up when the unit is work. 2 Heat mode indication lamp Lights up when Heat mode is activated. 3 Cool mode indication lamp Lights up when Cool mode is activated. 4 Temperature indication lamp • Displays the setting or room temperature when the unit is operational. • Displays the malfunction code when fault occurs. • Displays the function code when some function is activated.
ENGLISH 4.2 Location of the Remote Controller Max. 8m • Keep the remote controller where its signal can reach the receiver of the indoor unit (a maximum distance of 8 m is allowed). • When the remote controller sends out a signal, the symbol will blink on the display. The indoor unit will acknowledge the signal with a beep sound when it receives an effective signal. 4.
www.electrolux.com 5. REMOTE CONTROLLER DESCRIPTION 16 17 18 19 20 9 1 10 2 3 11 4 12 5 13 14 15 6 7 8 1. MODE BUTTON Press the button to set the operation mode: Auto, Cool, Dry, Heat and Fan. Default setting: AUTO. • For Cooling only models, there is no HEAT mode available. 2. ON/OFF BUTTON Press the button to switch on or off the unit. 3. SWING BUTTON Press this button to stop or start vertical louver movement or set the desired left/ right air flow direction.
ENGLISH Press the button to enable or disable the I Feel function. 7. I CLEAN BUTTON Press the button to enable or disable the I Clean function. Default setting: OFF. 8. X-FAN BUTTON Press the button to enable or disable X-Fan function. Default setting: OFF. 9. / BUTTON Press the button to increase/decrease the temperature. Temperature range: 16-32 °C (60-90 °F). In Timer function, use the button to set the timer adjustment. 10.
www.electrolux.com 6. HOW TO USE THE REMOTE CONTROLLER Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of the indoor unit illuminates. Basic Operation C B A D 1. Press the ON/OFF button (A) to start the air conditioner. 2. Press the MODE button (B) to select Auto, Cool, Dry, Fan or Heat mode. / button (C) to 3. Press the set the desired temperature. The temperature can be set in 1ºC increments.
ENGLISH 11 Swing Operation A B Press the Swing button (A) and the Swing button (B) to adjust the desired airflow direction. 1. Left/Right direction can be adjusted with the button (A) on the remote controller. Press the button, the louver will swing left and right automatically. Press the button again to stop the louver at your desired position. 2. Up/Down direction can be adjusted with the button (B) on the remote controller. Press the button, the louver will swing up and down automatically.
www.electrolux.com • When setting the Timer on or Timer off functions, up to 10 hours, the time will increase in 30 minute increments with each press. After 10 hours and up to 24, it will increase in 1 hour increments. Examples of Timer Settings TIMER ON TIMER OFF Example: It is 8:00 AM and you want the air conditioner to start working after 6 hours. 1. When the remote controller is at off state, press the Timer button, the Timer on signal and time will show on the display. / button until “6.0h“ 2.
ENGLISH 13 Advanced Functions Operations 1. °C/°F switch function °C/°F can be switched by pressing and Mode buttons at the same time for 3 seconds. 2. Turbo function Press the Turbo button to enable or disable the turbo function. The Turbo function makes the unit work extra hard to reach your set temperature in the shortest time as soon as possible. When you need fast cool or heat, you can choose this function. 1 2 3 4 5 3.
www.electrolux.com 5. X-Fan function 7. Sleep function In power on mode, press X-Fan button, after 5 continuous rings the function will activate successfully. The indoor fan motor will keep on working for 4 minutes after the unit turned off to dry the indoor unit to prevent from bacteria and mildew growing. Continuous pressing the X-Fan button two times, the function will canceled after 3 continuous rings. X-Fan function is long available after setting. Press sleep button to enter sleep mode.
7. HOW TO USE THE INDOOR UNIT Vertical louver ENGLISH 1. Adjust the air flow direction properly otherwise it might cause discomfort or cause uneven room temperatures. 2. Adjust the horizontal louver using the remote controller. 3. Adjust the vertical louver using the remote controller. 4. Adjust the vertical louver manually (For models without 3D Swing function). To set the vertical air flow (Up Down) direction Perform this function while the unit is in operation.
www.electrolux.com 8. OPERATING TEMPERATURE Operating temperature ranges Model climate Type Ambient temperature (Cooling) Ambient temperature (Heating) T1 18°C~43°C -7°C~43°C Important! 1. Optimum performance will be achieved within these operating temperatures. If air conditioner is used outside of the above conditions, certain safety protection features might come into operation and cause the unit to function abnormally. 2.
ENGLISH 10. CLEANING AND MAINTENANCE 17 10.1 Before Maintenance Turn the system off before cleaning. To clean, wipe with a soft, dry cloth. Do not use bleach or abrasives. WARNING! Power supply must be disconnectd before cleaning the indoor unit. • A cloth dampened with cold water may be used on the indoor unit if it is very dirty. Then wipe it with a dry cloth. • Do not use a chemically treated cloth or duster to clean the unit.
www.electrolux.com 5. Install the air freshening filter back into position. 3. Install a new air freshening filter. 4. Reinstall the air filter and securely close the front panel. 10.6 Preparation for extended non-operation 6. Insert the upper portion of air filter back into the unit, taking care that the left and right edges line up correctly and place filter into position. If you plan to idle the unit for a long time, perform the following: 1. Clean the indoor unit and filters. 2.
11. OPERATION TIPS The following events may occur during normal operation. 1. Protection of the air conditioner Compressor • The compressor can’t restart for 3-4 minutes after it stops. 2. Anti-cold air (Cooling and heating models only) • The unit is designed not to blow cold air on HEAT mode, when the indoor heat exchanger is in one of the following three situations and the set temperature has not been reached. A) When heating has just started. B) Defrosting. C) Low temperature heating.
www.electrolux.com turn off the unit automatically. Dripping water may generate on the surface of the indoor unit when cooling in a high relatively humidity (relative humidity higher than 80%). Adjust the horizontal louver to the maximum air outlet position and select HIGH fan speed. Insufficient Heat (For cooling 10. and heating models only) The air conditioner draws in heat from the outdoor unit and releases it via the indoor unit during heating operation.
ENGLISH 12. TROUBLESHOOTING OPERATION (RUN) indicator or other indicators continue flashing. Trouble If one of the following code appears on the display area: E0, E1, E2...En, F0, F1, F2... Fn, P0, P1, P2...Pn, L0, L1, L2...Ln Fuse blows frequently or circuit breaker trips frequently. Other objects or water fall into the air conditioner. Terrible odors are smelled or abnormal sounds are heard.
www.electrolux.
