Installation

5 ENGLISH
2. BEFORE INSTALLATION
2.1 Tools needs for installation
1. Level gauge
2. Screw driver
3. Electric drill
4. Hole core drill
5. Flaring tool set
6. Specied torque wrenches
7. Spanner (half union)
8. A glass of water
9. Hexagonal wrench
10. Gas-leak detector
11. Vacuum pump
12. Gauge manifold
13. Pipe expander
14. Multimeter
15. Pipe cutter
16. Measuring tape
17. Other tools
2.2 Accessories
Number Name of Accessories Quantity
1
Indoor unit mounting plate 1
2
Clip anchor Varies by models
3
Self-tapping screws (for mounting plate) Varies by models
4
Remote controller 1
5
Remote controller Holder / Screws Optional
6
Battery (AAA 1.5V) 2
7
Piping hole cover Optional
8
Pipe insulation belt 1
9
Refrigerant piping (Liquid/Gas pipe) Optional
10
Signal cable Optional
11
Drain hose 1
12
Cushion Optional
13
Drain connector (Heat Pump model only) Optional
14
Drain plug (Heat Pump model only) Optional
15
Flare nut (for gas pipe) Optional
16
Flare nut (for liquid pipe) Optional
17
Handle screw (for outdoor unit) Optional
18
Wall mud Optional
19
Magnetic ring Optional
20
Healthy filter** (Packed in the plastic bag)
Varies by models
Note:
The accessory parts may vary from each model, please refer to the actual parts.
Other necessary parts for the installation, besides the above mentioned, must be
provided by the customer/installer.
**
Please install the Healthy lter like Active carbon lter, Bio-Hepa lter, Vitamin C lter,
Silver ion lter or any other lters with the dust lter in the indoor unit. For some models,
we already have the Healthy lters installed in the indoor unit.