User manual
11 ENGLISH
7. FIRST USE
1. Ensure the unit is plugged in and power
is available.
2. Be sure the batteries are inserted
correctly in the remote controller (the
lights on the remote control will be on).
3. Point the remote controller to the indoor
unit and press ON/OFF button to turn
the unit on.
4. Set the time by Control buttons and
conrm by pressing the Clock button.
• In case of energy cut off or
product shut down when
removing the power cord,
or even when changing the
remote controller batteries the
microprocessor will return back
to the AUTO mode.
• The default operating mode
is AUTO. Once you select the
operating mode with remote
controller, the operating
conditions will be saved in the
indoor unit’s microcomputer
memory. The next time the air
conditioner will start operating
under the same conditions when
you simply push the ON/OFF
button of the remote controller.
For models without Clock button,
to enabled Clock funtion you need
press Mode and Temp buttons at
the same time.
TIMER-ON DISPLAY
Displays when the Timer-On function is
enabled.
MODE DISPLAY
Displays the current selected mode.
Including AUTO, DRY, FAN, COOL and
HEAT.
FAN SPEED DISPLAY
Displays the selected fan speed: AUTO,
LOW, MED and HIGH. Nothing displays
when the fan speed is selected in AUTO
speed. When AUTO or DRY Mode
is selected, there will be no signals
displayed.
TURBO DISPLAY
Displays when Turbo function is enabled.
ECO DISPLAY
Displays when Eco function is enabled.
HEALTH DISPLAY
Displays when Health function is enabled.
There is no such indicator for the
models without Health function.
SWING DISPLAY
Displays when Swing function is enabled.
°C/°F DISPLAY
Displays when °C or °F mode is selected.
Turn the remote controller off and the
°C/°F can be switched by pressing Mode
and DOWN buttons at the same time.
LIGHT DISPLAY
Displays when Light function is enabled.
TIMER DISPLAY
Displays the Clock time (must be set) and/
or the on/off time of the timer.
LOCK DISPLAY
Displays when Lock function is enabled.
Press Mode and Fan buttons at
the same time, you can lock and
unlock the remote controller.
TIMER-OFF DISPLAY
Displays when the Timer-Off function is
enabled.