User manual

14 www.electrolux.com
Swing Operation
A
1. When press the button (A) once and
quickly, the air flow direction setting
feature of the louver is activated.
2. If keep pressing the SWING button
without releasing for 2 more seconds,
the auto swing feature of the louver is
activated. The horizontal louver would
swing up/down automatically. Press it
again to stop.
When the louver swing or move
to a position which would affect
the cooling and heating effect
of the air conditioner, it would
automatically change the swing/
moving direction.
Timer Operation
Press the Timer-On button (A) can set the
auto-on time of the unit. And press the
Timer-Off button (B) can set the Timer-off
time of the unit.
To set the Timer-On time.
1. Press the Timer-On button. The signal
will flash on the display
in case of the rst use of Timer-On
operation. Otherwise, the last set time
will flash. Now it is ready to reset the
Timer-on time to START the operation.
2. Push the UP/DOWN button to set
desired Timer-On time. Each time you
press the button, the time increases
in 1 minutes increments, holding the
button down for 2 seconds will scroll
more rapidly through the time display.
3. Press the Timer-On button again to
conrm the set time. The signal “
”
will stay on the display.
4. To cancel settings, press the Timer-
On button again. Make sure the signal
“
” on the display is turned off.
A
B