Product Manual

WARNING
CAUTION
ARNING
Do not fill the water tank with anything other than clean
water (Filtered or Mineral water).
Soft drink, juice, tea or hot water etc, can damage your
automatic icemaker.
The water tank can withstand a maximum water
temperature of 60°C.
S & INFORM ATION
Remove and clean
ice bin and water tank once a month,
di
scardi
ng unused ice and water. This will ensure fresh ice
and smooth operatio n of your icemaker.
Make sure your refrigerator is level to avoid uneven ice
cubes.
Tips and Useful Information
Fill the ice tube tray with potable water only.
LED lighting
Your appliance is fitted with long life LED lighting. In the
unlikely event the LED lights should fail, then the LED lights
should be serviced by the manufacturer.
Refer to the warranty page for contact details.
CAUTION
4. Refit the runner into the rear of the shelf on the right
hand side and then
engage the front.
5. Fit the carriage by sliding it into the runners until the
front if the carriage engages with the shelf.
6. Refit the ice tray and ice bin.
Insert into the slot at the rear
of the shelf
Then engage into the front
of the shelf
2. Before you remove the ice carriage, remember to
disengage it from the glass shelf as it may result in
damage to the assembly.
3. Remove the centre runner by disengaging it at the front
of the shelf, and removing it from the rear.
CAUTION
1. Remove the ice
bin and ice cube
tray. If the ice tray
assembly is frozen to
the carriage, simply
squeeze the
tray
and shelf together to
break the ice.
Never close the door while the telescopic slides are
extended. It may damage the slide and/or the refrigerator
or cause the slide to become disengaged from the
refrigerator.
Twist and Serve Ice
Mounting the twist & serve dispenser to the other side of
the freezer.
Note : This is only possible on top mount models.
Step 4. Ensure ice maker is
switched ON (refer control
instructions).
Automatic Ice Maker
The automatic ice making function pumps water from
the water tank located
in the refrigerator and dispenses it
into the automatic ice maker in the freezer.
The ice will then be dropped into the ice bin located
beneath the ice maker
If the water tank is empty, the ice maker will automatically
turn off after 3 attempts at pumping water from the tank.
The ice maker indicator on the user interface shows the
operational status of the ice maker (Refer control
instructions).
Water Tank Refilling
Step 1. Pull the tank directly out of
the tank housing frame.
Step 2. Pour potable water
through the lid at the top of the
water tank.
Step 3. Push the tank directly into
the tank housing frame. To avoid
water leaks ensure that the tank
nozzle fully engages with the
housing socket.
REMOVING FEATURES 11