Installation guide

This induction cooktop is able to make
many kinds of cuisine having high thermal
efficiency and being safe and easy to clean.
Putting a pot on the appliance
Put the pot with food/liquid on the cooking
zone. Make sure the air inlet and air outlet
are not blocked and there are no metallic
objects close to the appliance.
Turning on the appliance
Connect the power cord to a power outlet,
the buzzer will sound and the power indicator
will flash. When the power control is pressed,
the buzzer will sound, the power indicator
lights up and this indicates that the induction
cooktop is in standby mode.
OPERATING THE APPLIANCE
Hot pot function
When the appliance is in standby mode,
press the “ ” button or the “ ” button
enter the function mode. when the buzzer
sounds and the power indicator lights up,
the appliance will start heating.
The default power level is 1600W, default
timer is 2 hours.
You can adjust the power level between
120W to 2000W by pressing the “+” or “-”
button.
The timer adjust between 30 minutes to
3 hours by pressing the " ", then
press the “+” or “-“ for desired time
Keep warm function
The default power level is 120W, default
timer is 2 hours.
You can not adjust the power level in
the keep warm mode.
The timer adjust between 30 minutes
to 3 hours by pressing the " ", then
press the “+” or “-“ for desired time
For model : ETD29PKB , ETD29PKR
For model : ETD29KC
When the appliance is in standby mode,
press the “ + ” button or the “ - ” button
enter the heating mode. when the buzzer
sounds and the power indicator lights up,
the appliance will start heating.
The default power level is 1600W, default
timer is 2 hours. You can adjust the power
level between 120W to 2000W by pressing
the “+” or “-” button.
The timer adjust between 30 minutes to
3 hours by pressing the " ", then press
the “+” or “-“ for desired time
Selecting function