Top mount Refrigerator User manual Bottom mount Single door all refrigerator Single door all freezer Built-in refrigerator Built-in freezer
WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Welcome to Electrolux.
IMPORTANT SAFETY INSTRUCTIONS Before you use the refrigerator, we recommend that you read through the relevant sections of this manual, which provides the description of your appliance and its functions. To avoid the risks that are always present when you use an appliance, it is important that the appliance is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards.
GENERAL WARNINGS Read the following carefully to avoid damage or injury This symbol indicates never to do this This symbol indicates always do this It is important to use your refrigerator safely. Check these safety points before using your refrigerator. The appliance must be plugged into its own dedicated 220-240V, 50Hz AC electrical outlet. Ensure that the electrical outlet is properly earthed. Consult a qualified electrician if you are unsure.
TOP MOUNT FREEZER MODEL (TM) 1 Sensor (electronic models only) 2 Freezer light (electronic models only) 3 Freezer air delivery vents 4 Adjustable Spillsafe™ glass shelf 5 Twist ice & serve with ice cube trays 6 Freezer air return vents 7 Sensor (electronic models only) 6 8 Deodoriser 7 9 Fridge and freezer temperature controls (manual control models) 1 2 3 4 5 18 8 19 9 10 Adjustable Spillsafe™ glass shelves 11 Spillsafe™ slide away shelf (where fitted) 20 10 11 21 12 12 Fr
SINGLE DOOR ALL REFRIGERATOR MODEL (AR) 1 11 2 12 3 4 13 5 14 6 1 Deodoriser 2 Fridge temperature control 3 Adjustable Spillsafe™ glass shelves 4 Spillsafe™ slide away shelf (where fitted) 5 Fridge light 6 Deli compartments 7 Bottle caddy 8 Crisper humidity control 9 Full width crisper bin 10 Adjustable rollers 11 Dairy compartments 7 12 Egg tray 13 Adjustable door bins 3 15 14 Bottle twist holder 15 Full width bottle bins 8 16 Can bin 17 Stabilising foot 9 16 10 17 Not
BUILT-IN REFRIGERATOR 1 9 2 3 4 10 3 11 1 Deodoriser 2 Fridge temperature control 3 Adjustable Spillsafe™ glass shelves 4 Slideable deli compartment 5 Fridge light 6 Bottle caddy 7 Crisper humidity control 8 Full width crisper bin 5 12 6 9 Dairy compartments 10 Egg tray 11 Half width door bins 12 Bottle restrainers 13 3 13 Full width bottle bins 14 Can bin 7 8 14 Note: Product illustrations demonstrate various features but may not be completely in line with current produc
BOTTOM MOUNT ICE & WATER MODEL 1 1 15 2 LED light 2 Electronic controls 3 Spillsafe™ slide away shelf (where fitted) 4 Adjustable Spillsafe™ glass shelf 5 LED fridge light 6 Deli compartments 17 7 Crisper humidity controls 18 8 Crisper bins 16 3 4 5 6 19 7 8 9 Deodoriser 10 Freezer storage tray 11 Ice maker assembly 9 20 10 12 Ice bin with scoop (inside freezer drawer) 13 Freezer drawers on telescopic extension slides 14 Adjustable rollers 11 15 Dairy compartments 16 Adjus
INSTALLING YOUR NEW APPLIANCE TIPS & INFORMATION! • For built-in models, refer to the separate booklet. • To join two E:Line modular fridges together, refer to the booklet with the connection kit. Adequate ventilation around your refrigerator. The diagram below shows the recommended airspace to allow for ventilation of your refrigerator. All models except EBE5167SD: If gap (Y) is not minimum of 100mm, then gap (X) increases from 50 to 90mm.
INSTALLING YOUR NEW APPLIANCE 7. You may now need to fine-tune the installation by repeating Steps 3, 4 and 5. 8. When you have the appliance in its final position, it needs to be stabilised. Wind the stability foot down to the floor until it just makes contact with the floor. Lift the front of the appliance to take the weight off the stability foot, then turn it ¼ turn further to ensure firm contact with the floor.
ICE & WATER INSTALLATION WARNING! Connect to potable water supply only The external water filter kit An external water filter and connection kit has been supplied for use with your Ice & Water refrigerator. The external filter design allows more space within the refrigerator and provides double the life of previous filters reducing the cost of replacement. The filter is designed to significantly reduce chlorine, taste, odour, heavy metals, turbidity (cloudiness) and scale build up.
ICE & WATER INSTALLATION Never install the water filter in an area of direct sunlight. Check for water leaks at all water connection points in the first 2 to 3 hours after installation, and correct it in case of any water leak. Recheck after 24 hours; if leak still occurs, it is recommended to contact a licensed plumber for advice. Water is to be connected as per diagram below. Step 3. Connect tap fitting to water supply tap. Tap must be close to the refrigerator. Step 4.
ICE & WATER INSTALLATION Step 7. Fit filter to brackets with water flow arrow pointing up. Step 12. Turn on water and check all joints and tubes for leaks. water flow direction Step 8. Push shorter tube into tap fitting past insertion mark. Step 13. Reconnect the power. Step 9. Push other end into filter INLET. Step 14. Move the refrigerator back into place being careful not to kink or split the tubing. Step 10. Connect remaining tube length into filter OUTLET. Step 11.
ICE & WATER INSTALLATION Step 15. Using a large container run the water dispenser to clear air from lines. This may take a few minutes. Purge and dispense a minimum of 2 litres of water. Initial water may be black in colour. This is residual carbon dust from the filter and is non-toxic. If the water is slow to shut off or the dispenser is dripping, air may still be in the lines.
ELECTRONIC DISPLAY CONTROLS – ELECTRONIC MODELS The electronic display panel consists of an LCD display with black backlighting and 6 touch buttons. When the power is first turned on, the display with backlighting will come on. If no buttons have been pressed and the fridge door is closed the backlighting will turn off after 30 seconds.
ELECTRONIC DISPLAY CONTROLS – ELECTRONIC MODELS Drinks chill timer The drinks chill timer is used to quickly chill a bottle. Place the bottle in the freezer and the timer can be set for a minimum of 5 minutes to a maximum of 30 minutes. To set, simply press the drinks chill button repeatedly for the number of minutes (in 5-minute intervals). Once set, an animated icon appears beside the drinks chill button, with a timer that counts down one minute at a time.
ELECTRONIC DISPLAY CONTROLS – ICE & WATER MODELS The electronic display panel consists of an LCD display with white backlighting. When the power is first turned on, the display, with backlighting, will activate. If no buttons have been pressed and the fridge door is closed the backlighting will turn off after 30 seconds. Changing the refrigerator temperature Press the Select button until the food compartment is illuminated on the refrigerator icon.
ELECTRONIC DISPLAY CONTROLS – ICE & WATER MODELS Display Lock • Normal mode Press and hold the Display Lock button for 3 seconds to activate the display lock. This will disable the display to prevent accidental changes to settings. To turn the display lock off, hold the Display Lock button for 3 seconds. Normal mode is used when you require extra cooling or when the refrigerator door is opened more than usual.
ELECTRONIC DISPLAY CONTROLS – ICE & WATER MODELS Fast ice The fast ice mode allows for increased production of ice, which is useful for entertaining. To use this function, press the Modes button until Fast Ice is illuminated. The fast ice function will now operate for 12 hours. If you want to turn the fast ice off before 12 hours have passed, simply press the Modes button again until the Fast ice icon disappears and the refrigerator will return to normal operation.
MANUAL (ROTARY) CONTROLS – MANUAL MODELS • Adjusting the refrigerator temperature – bottom mount freezer (BM) model 1. Select the refrigerator control (top knob). 2. Rotate the knob clockwise to set colder. 3. Rotate the knob anti-clockwise to set less cold. USING YOUR APPLIANCE Crisper bin Use the crisper bin to store vegetables, fruit or small goods. Change the humidity by sliding or rotating the humidity control.
USING YOUR APPLIANCE WARNING! Never store solvents or flammable materials like nail polish remover or lighter fluid inside your refrigerator. They will affect the life of the plastic components and may taint stored food. Door storage bins The top mount models, bottom mount freezer model and all refrigerator models are fitted with door storage bins. These bins adjust to meet different storage needs. All the door bins are completely removable for cleaning.
USING YOUR APPLIANCE Spillsafe™ glass shelves Spillsafe™ glass shelves keep spills on the shelf. A shelf retaining system minimises accidental movement of shelves and they can be adjusted to various heights. Spillsafe™ glass shelves are not to be used as slide out shelves. To remove the shelves, gently pull them forward until the shelf comes clear of the shelf guides. To return the shelf, make sure there is nothing behind that may obstruct movement.
USING YOUR APPLIANCE CARE AND MAINTENANCE Twist ice & serve (where fitted) Top mount, bottom mount and single door all vertical freezer models have a twist ice & serve ice cube tray assembly. To use, remove the tray, fill with water and place back in the freezer. Once ice has formed (approximately 3 hours) simply twist the knob at the front clockwise until the ice drops into the bin below. A larger bin is provided in some bottom mount models along with an ice scoop.
CARE AND MAINTENANCE • Freezer light (where fitted) Top freezer model (electronic models only) Single door all freezer and built-in freezer model 1. Switch off the power at the power point and remove the refrigerator’s power cord from the power point. 2. Carefully unclip the light cover. You do this by pulling the light cover tab at the rear towards the front of the cabinet. 3. Unscrew the light bulb and replace it with a bulb that is the same as the original.
TROUBLESHOOTING If you think something may be wrong with your refrigerator, you can carry out some easy checks before calling for service. You may locate the problem, sparing yourself from inconvenience, saving time and money.
ICE + WATER TROUBLESHOOTING Problem Possible causes Solution • Ice maker is in the OFF position • ee Ice maker section in user manual: turn S switch to ON position • Water tap is turned off • Turn on the water tap • The freezer is not cold enough • See the Problem section: ‘If the temperature in the refrigerator is too warm’ • The water dispenser may not be dispensing water • If it isn’t, the ice & water filter cartridge may be clogged or restricted by foreign material, and will ne
Warranty FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: REFRIGERATION This document sets out the terms and conditions of the product warranties for Electrolux Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance. 1.
Electrolux Home Products Australia telephone: 1300 363 640 fax: 1800 350 067 email: customercare@electrolux.com.au web: www.electrolux.com.au Electrolux Home Products New Zealand telephone: 0800 436 245 fax: 0800 225 088 email: customercare@electrolux.co.nz web: www.electrolux.co.nz The Thoughtful Design Innovator.
