User manual

26 www.electrolux.com
FIRST USE
Cleaning the interior
Before using the appliance for the rst
time, wash the interior and all internal
accessories with lukewarm water and
some neutral soap so as to remove the
typical smell of a brand new product,
then dry thoroughly.
CONTROL PANEL
The control panel that controls the tem-
perature inside the freezer compartment
is located inside the freezer.
: Eliminate alarm sound button.
Alarm : extensive temperature indicator.
Power : electrical power indicator.
Super : Super Freeze indicator.
Super Freeze : Super Freeze button.
SUPER FREEZE (Button)
If you need the temperature inside the
freezer to drop quickly, please press this
button and indicator of super will be on.
The unit runs in Super Freezer.
If you need the appliance to stop the
mode of Super Freeze, please repress
the Super Freeze (button), the indicator
of super shuts off.
Attention! At super freeze mode,
the freezer will automatically quit
super freeze mode after 48 hours,
the super indicator will shut off
simultaneity.
ALARM FOR FREEZER
When powered, and the inside tem-
perature has reached the higher degree
≥-10°C, then the indicator starts to work.
When temperature ≥ -10°C, The indica-
tor light begins to ash, and at the same
time, the alarm sounds 3 times per 10
Important!
Do not use detergents or abra-
sive powders, as these will dam-
age the nish.
seconds. After 2 minutes, the alarm will
automatically stop, and the Excessive
temperature indicator will be on but will
stop ashing. When temperature
< -10°C,Excessive temperature indicator
shuts off.
: (button) During the alarm
of freezer, press
: the alarm sound
is stopped, and the excessive tempera-
ture indicator is on but no ashing.
Important! - Normally we advise
you select setting of Mid, if you
want the temperature warmer or
colder please turn the knob to
lower or higher setting accor-
dingly. When you turn the knob to
lower which can lead to the more
energy-saving. Otherwise, itwould
result the high energy-consuming.
Important! - High ambient tem-
peratures (e.g. on hot summer
days) and a cold setting on the
temperature regulator (position
Colder) can cause the compres-
sor to run continuously or even
non-stop!
Reason: when the ambient temperature
is high, the compressor must run con-
tinuously to maintain the low tempera-
ture in the appliance.
Alarm
Cold Colder
Mid
Power Super Super Freeze