User manual

3.
The alarm buzzer could operate after
few seconds.
To reset the alarm refer to "High tem-
perature alarm".
4.
If DEMO appears on the display, the
appliance is in demonstration mode.
Refer to "What to do if..." paragraph.
5.
The temperature indicators show the
set default temperature.
To select a different set temperature refer
to "Temperature regulation".
2.3 Switching off
To switch off the appliance do these
steps:
1.
Press the ON/OFF button for 3 sec-
onds.
2.
The display switches off.
3.
To disconnect the appliance from the
power disconnect the mains plug
from the power socket.
2.4 Temperature regulation
The set temperature of the freezer may be
adjusted by pressing the temperature but-
ton.
Set default temperature:
• -18°C for the freezer
The temperature indicator shows the set
temperature.
The set temperature will be reached with-
in 24 hours.
After a power failure the set tem-
perature remains stored.
2.5 Ice maker function
The ice maker is switched on at delivery
and starts up automatically when the ap-
pliance is connected to water and power
supplies.
To switch on and off the function:
1.
Press the Mode button until the cor-
responding icon appears.
The OFF icon is shown when the ice mak-
er is deactivated.
2.6 EcoMode
For optimal food storage select the Eco-
Mode .
To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
The temperature indicator shows the
set temperature:
– for the freezer: -18°C
The EcoMode indicator is shown.
To switch off the function:
1.
Press the Mode button in order to se-
lect an other function or press the
Mode button until you can see none
of the special icons.
The function switches off by se-
lecting a different set temperature.
2.7 ActionFreeze mode
To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
This function stops automatically after 52
hours.
To switch off the function before its auto-
matic end:
1.
Press the Mode button in order to se-
lect an other function or press the
Mode button until you can see none
of the special icons.
The function switches off by se-
lecting a different freezer set tem-
perature.
2.8 DrinksChill mode
The DrinksChill mode is to be used to set
an acoustic alarm at the preferred time,
useful for example when a recipe requires
to cool down a mixture for a certain peri-
od of time, or when a reminder is needed
in order not to forget the bottles placed in
the freezer for fast cooling.
To switch on the function:
1.
Press the DrinkChill button.
The DrinksChill indicator appears.
The Timer shows the set value (30 mi-
nutes).
2.
Press the Temperature colder button
and Temperature warmer button to
change the Timer set value from 1 to
90 minutes.
3.
The Timer start to flash (min).
At the end of the countdown the Drinks-
Chill indicator flashes and an audible
alarm sounds:
6
www.electrolux.com