User manual

Service
Any electrical work required to do the serv-
icing of the appliance should be carried
out by a qualified electrician or compe-
tent person.
This product must be serviced by an au-
thorized Service Centre, and only genu-
ine spare parts must be used.
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer,
in either its refrigerant circuit or insula-
tion materials. The appliance shall not
be discarded together with the urban re-
fuse and rubbish. The insulation foam
contains flammable gases: the appli-
ance shall be disposed according to
the applicable regulations to obtain
from your local authorities. Avoid dam-
aging the cooling unit, especially at the
rear near the heat exchanger. The ma-
terials used on this appliance marked
by the symbol
are recyclable.
CONTROL PANEL
MODE
1 2 3 4
1 ON/OFF switch
2 Display
3 Function button
4 Temperature regulator
Display
1 2 3 4
1 Door open alarm indicator
2 Positive or negative temperature indica-
tor
3 Temperature indicator
4 Action Freeze indicator
Switching on
After plugging the plug into the power out-
let, if the display is not illuminated, press ON/
OFF switch, appliance on.
As soon as the appliance is turned on, the
following signals will appear on the control
panel:
Positive or negative temperature indicator
will be positive, indicating that the temper-
ature is positive
the Temperature indicator flashes, the
background of the display is red and you
will hear a buzzer.
Press Function button and the buzzer will
go off (also see "Excessive temperature
alarm" ).
Place the Temperature regulator in a middle
position, and the appliance will be set up to
provide the following temperature:
roughly -18°C in the freezer.
Functions Menu
Each time Function button is pressed, the
following functions are activated in a clock-
wise direction:
Action Freeze function
no symbol: normal operation.
14 electrolux