User Manual

12.1 Shelf supports
You can remove the shelf supports to
clean the side walls.
Removing the shelf supports
1.
Pull the front of the shelf support
away from the side wall.
2
1
2.
Pull the rear end of the shelf support
away from the side wall and remove
it.
Installing the shelf supports
Install the shelf supports in the opposite
sequence.
12.2 Removing / inserting the
door
Remove the door to clean the inner side
of the appliance.
WARNING!
Pull the door away from the appli-
ance. The door is heavy!
CAUTION!
Put the door with the outer side
down on a soft and level surface
to prevent scratches.
3
4
2
Removing the door
1.
Open the door as far as it goes.
2.
Lift up the clamping levers on both
door hinges fully.
3.
Hold the door on both sides with both
hands and close it approximately 3 /
4 of the way going through the point
of resistance.
26
www.electrolux.com