Dimension Sheet

Laundry
Range
The right amount
of care
Cooking
Dimension Guide
Built-in ovens / underbench
Please note! Dimensions to be used as a guide only. All customers MUST refer to the user manual supplied with the product for detailed installation instructions.
* D - Dimension
For proper ventilation there must be a gap at the bottom rear of the cabinet. This can be a slot 20mm deep or an equivalent, full width opening (e.g. a series of holes)
with a min area of 120cm
2
. The opening must be clear of the product when fully installed. This is a requirement any EVEPxxxxx model. Power point connection for the
EVEP618 must be accessible with the appliance fully installed. If the supply cord is damaged it must be replaced by the manufacturer, its service agent or similarly
qualied persons in order to avoid a hazard.
© 2018 Electrolux Home Products Pty Ltd. EDIM_Oven_60_UB_Jan19
mounting holes
582mm
561mm
596mm
Models:
EVEP614SD
EVEP614DSD
EVEP616DSD
EVEP618DSD
A
B
C
D*
Pyrolytic cut-out dimensions
Type of fit A (width) B (height) C (depth) D*
Flush fit (mm) 600 600 581 min. 20

Summary of content (1 pages)