Operation Manual

5.3 Display
A B C
DEFG
A)
Timer
B)
Heat-up and residual heat indicator
C)
Water drawer (selected models only)
D)
Core temperature sensor (selected
models only)
E)
Door lock (selected models only)
F)
Hours / minutes
G)
Clock functions
5.4 Buttons
Button Function Description
CLOCK To set a clock function.
,
MINUS, PLUS To set the time.
MICROWAVE To set the MICROWAVE.
TEMPERATURE To check the oven temperature or
the temperature of the Core Temper-
ature Sensor (if applicable). Use only
while an oven function is in operation.
5.5 Heat-up / Residual heat
indicator
If you activate an oven function, the bars
in the display
come on one by one.
The bars show that the oven temperature
increases or decreases.
6. MICROWAVE MODE
6.1 Setting the Microwave
function
1.
Turn the knob for the oven functions
to select a microwave function
.
The display shows a default micro-
wave power and then a default value
of the Duration function.
2.
Press and turn the knob for the
temperature / microwave power
to change the microwave power
settings.
The power settings changes in 100 W
steps.
3.
Press and then / to change
the Duration settings.
The appliance automatically starts to
operate after few seconds.
4.
When the set time ends, an acoustic
signal sounds and the Microwave
function deactivates automatically.
5.
Turn the knob for the oven functions
to off position (“0”).
CAUTION!
Do not let the appliance operate
when there is no food in it.
ENGLISH 9