User manual

Oven function Application
Bread Baking Use this function to prepare bread and bread rolls
with a very good professional-like result in terms of
crispiness, colour and crust gloss.
Steam Regener‐
ating
Food reheating with steam prevents surface drying.
Heat is distributed a gentle and even way, which al‐
lows to recover taste and aroma of food as just pre‐
pared. This function can be used to reheat food di‐
rectly on a plate. You can reheat more than one
plate at the same time, using different shelf posi‐
tions.
Quarter Steam +
Heat
To bake bread, roast large pieces of meat or to
warm up chilled and frozen meals.
Half Steam +
Heat
For dishes with a high moisture content and for
poaching fish, custard royale and terrines.
Full Steam For vegetables, fish, potatoes, rice, pasta or special
side-dishes.
The lamp may automatically
deactivate at a temperature
below 60 °C during some
oven functions.
6.3 Setting the oven function
1. Activate the appliance with .
The display shows the set temperature,
the symbol and the number of the oven
function.
2. Touch or to set an oven
function.
3. Touch
or the appliance starts
automatically after five seconds.
If you activate the appliance
and do not set an oven
function or programme, the
appliance deactivates
automatically after 20
seconds.
6.4 Changing the temperature
Touch or to change the
temperature in steps of 5 °C.
When the appliance is at the set
temperature, an acoustic signal sounds
three times and the Heat up indicator
goes out.
6.5 Checking the temperature
You can see the temperature in the
appliance when the function or
programme operates.
1. Touch .
The Temperature / Time display shows
the temperature in the appliance.
2. Touch
to go back to the set
temperature or the display shows it
automatically after five seconds.
6.6 Fast heat up function
Do not put food in the oven
when the Fast heat up
function operates.
The Fast heat up function is not available
with every oven function. An acoustic
signal sounds if the Fast heat up function
is not available for the set function if
Faulty tone is activated in the settings
www.electrolux.com12