User manual

Symbol Menu item Description
S1 Tank Emptying Procedure for removing the residual wa‐
ter from the water drawer after use of the
steam functions.
S2 Steam Cleaning Cleaning the appliance with steam.
S3 Descaling Procedure for cleaning the steam gener‐
ation circuit from residual limestone.
S4 Rinsing Procedure for rinsing and cleaning the
steam generation circuit after frequent
use of the steam functions.
12.5 Activating a cleaning
function
1. Activate the appliance.
2. Touch
until the display showsS1.
In some models you can also choose
S2, S3, S4.
3. Touch or to select a cleaning
function.
4. Touch to confirm.
12.6 Tank Emptying - S1
Remove all accessories.
The cleaning function removes the
residual water from the water drawer.
Use the function after the steam cooking
function.
The duration of the function is around 6
minutes.
The light in this function is off.
1. Put the tray on the first shelf position.
2. Activate Tank Emptying function -
S1. Refer to "Activating a cleaning
function".
3. Touch
.
Remove the baking tray after the end of
the procedure.
12.7 Steam Cleaning - S2
Remove as much dirt as possible
manually.
Remove the accessories and the shelf
support to clean the side walls.
The steam cleaning functions support the
steam cavity cleaning of the appliance.
For a better performance
you should start the cleaning
function when the appliance
is cool.
The specified time is related
to the duration of the
function and does not
include the time required for
cleaning of the cavity by the
user.
When the steam cleaning function is
active, the lamp is off.
1. Fill the water drawer to the maximum
level (around 950 ml of water) until
the acoustic signal sounds or the
display shows the message.
2. Activate Steam Cleaning function -
S2. Refer to "Activating a cleaning
function".
The duration of the function is around
30 minutes.
An acoustic signal sounds when the
programme is completed.
3. Touch a sensor field to deactivate the
signal.
4. Wipe the internal surface of the
appliance with a non-abrasive
surface care sponge. You can use
warm water to clean the cavity.
After cleaning keep the appliance door
open for approximately 1 hour. Wait until
the appliance is dry. To speed up the
drying you can heat up the appliance
www.electrolux.com40