User manual

3.
Set a heating function. Press OK to
confirm.
4.
Set the temperature. Press OK to
confirm.
Press to go directly to the Heat-
ing Functions menu. You can use
it when the appliance is activated.
6.5 Steam cooking
The water drawer cover is in the
control panel.
1.
Press the cover to open the water
drawer.
2.
Fill the water drawer with 700 ml of
water.
The water supply is sufficient for ap-
proximately 30 minutes.
CAUTION!
Do not put water directly into the
steam generator!
Use only water as the liquid. Do
not use filtered (demineralised) or
distilled water.
3.
Activate the appliance.
4.
Set the steam heating function and
temperature.
5.
If necessary, set the function Duration
or End Time .
The first steam shows after approxi-
mately 2 minutes. An acoustic signal
sounds when the appliance is at ap-
proximately the set temperature.
The signal sounds again at the end of
the cooking time.
6.
Deactivate the appliance.
When the steam generator is
empty, an acoustic signal sounds.
When the appliance is cool, soak
up all remaining water from the
steam generator with the sponge.
If necessary, clean the steam gen-
erator with some vinegar.
Let the appliance dry fully with the
door open.
6.6 Heat-up indicator
When you activate a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
Fast Heat Up Indicator
This function decreases the heat-up time.
To activate the function, hold
for 3 sec-
onds. The heat-up indicator alternates.
Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
6.7 Energy saving
The appliance contains fea-
tures which help you save en-
ergy during everyday cooking:
Residual heat:
When the heating function or pro-
gramme operates, the heating ele-
ments are deactivated 10% earlier
(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than 30
minutes or you must use the clock
functions ( Duration , End Time ).
When the appliance is off, you can
use the heat to keep food warm. The
display shows the remaining temper-
ature.
Cooking with the lamp off - touch
and hold
for 3 seconds to deactivate
the lamp during cooking.
When you use the Moist Fan Baking
function, the lamp deactivates after 30
seconds. The lamp activates again
when you touch
for 3 seconds or
when you open the appliance door.
Eco functions - refer to section "Heat-
ing Functions" (for selected models on-
ly).
ENGLISH 13