Service manual

Notice
Date Page
01201090
INSTRUCTION
HANDBOOK
Operating inspection
Before putting the machine into service, carry out the working tests.
The operating inspection must be done by an approved technician.
Manual operation
The procedure for operating the various machine functions manually is described in the chapter
"Machine operation" under the heading "Manual operation".
• Switch on the machine's main switch and check the voltage on the three phases (3 x 400
volts).
• Check the direction of rotation of the
cage during spinning. The cage should
rotate as shown by the arrow on the
hereby drawing. Check this point espe-
cially if you have changed the machine's
motor or frequency converter.
10. Operating
inspection
0199 1
10
D0692
1
4
7
2
5
8
3
6
9
0
Washer-extractor barrier types
D0706
1
4
7
2
5
8
3
6
9
0
Washer-extractor standard types