User manual

27
ENGLISH
SOMETHING NOT WORKING?
If the machine does not start up:
n
check that the door is firmly shut;
n
check that the appliance is plugged in;
n
check that the mains fuse is intact;
n
check that the programme selector dial is correctly
positioned and the ON/OFF button depressed.
If the machine does not fill:
n
is the tap on?
n
is water coming out of the tap? Check.
n
is the inlet hose squashed or bent?
n
is the filter of the inlet hose clogged?
n
is the door closed?
If the machine empties as it fills:
n
the end of the drain hose is too low.
If the machine does not drain and/or does
not spin:
n
is the drain hose squashed or bent?
n
is the drain filter clogged?
n
Have you selected a «gentle programme» with the
option ?
If there is water on the floor:
n
too much detergent or unsuitable detergent? The
formation of foam can cause water leaks.
n
is one of the joints or the tap leaking? It is not
always easy to see as the leak often runs along
the hose.
If the machine vibrates or is too noisy:
n
have all the transit bolts and packing been
removed?
n
is the machine touching something?
n
are all the feet resting firmly on the ground?
Spinning is slow starting:
n
The electronic unbalance control system has cut
in, because the wash load is not distributed evenly
in the drum. By reversing drum rotation, the load is
redistributed. This may happen more than once
before the unbalance is corrected and spinning
can proceed normally.
If you are unable to identify or solve the problem,
consult our service department. Before telephoning,
make a note of the make, model and date of purchase
of your machine: the Service Department will require
this information.
Mod. ..........
Prod. No. ...........
Ser. No. .........
Rating plate
Mod. ..........
Prod. No. ...........
Ser. No. .........
P0042
Rating plate