User manual

19
ENGLISH
1 Detergent dispenser drawer and programme card
Symbols
Prewash
Wash
Fabric softener
Chlorine
Programme cards in various languages are supplied
with the machine. One of these cards is located on
the front of the dispenser drawer, the others are in the
document pack.
2 Spin speed selector dial
By turning this dial from MAX to MIN you will obtain
the following speeds:
- cotton & linen: max 1000 rpm
min 650 rpm
- synthetics, delicates,
wool: max 850 rpm
min 450 rpm.
3 ON/OFF button
Press this button to start the machine, press it again
to stop a programme or to switch off the machine.
4 «Anti crease»button»
Press this button with the washing programmes for
synthetic or delicate fabrics in order to block the water
drainage of the last rinse. This avoids creasing when
the laundry is left inside the machine at the end of the
washing. To empty the machine, simply depress the
button again (the water will be drained and the
clothes will be gently spun) or select programme "M"
(drain).
5 «Economy » button E
For normally or lightly soiled laundry you can select
programme A 60°C or B 40°(cotton & linen) and pro-
gramme F 40°C (synthetics) by depressing but-
ton E.
The reduction in temperature from 95° to 60° and
from 60° to 40° will save energy. Equally good results
will be obtained because the reduced temperature is
compensated by maintaining the full washing time.
6 «Door open» button
Press this button to open the door.
7 «Door locked» light
This light stays on whilst the door is locked. The door
cannot be opened until the light has gone out.
8 «Temperature selector dial
Turn the dial clockwise or anti-clockwise to the requi-
red position.
It is also possible to perform a cold wash by turning
the dial to the symbol.
9 «Programme selector» dial
To select the required programme turn this dial
clockwise.
10 Operating pilot light
This light comes on when the programme starts and
goes out when the ON/OFF button is released.
USE
Control panel
P0909
Cl
1 2 3 4
5
6 7
8
9
E
Intuition
10