User manual

- 7 -
Programme chart
Rinse-hold – Rinse-hold is an optional function available for the Synthetics, Delicate and Wool
programmes. To select rinse-hold, press the option button on the machine control panel. Rinse-hold
means that the programme halts and the water from the last rinse is retained in the machine to minimise
creasing in synthetic fibres.
Once the programme has halted on rinse-hold, if you wish to end the wash with both emptying of water
and spinning of the load, press the option button again so it pops out. If you wish to end the wash by
emptying the water without spinning, you have to advance the programme control knob manually, to
programme setting L. Before you advance the programme control knob manually, we recommend that
you first press the On/Off button to switch the machine off (button pops out). Once the programme control
knob is set at L, press the On/Off button again (button remains in) to complete the programme.
Synthetics and Delicate (dry load weight: 1.5 kg)
Wool (dry load weight: 1.0 kg)
Spin
Load
type
Synthetics
Synthetics
Delicate
fabrics
Woollens
Drain
Normally
soiled
Lightly
soiled
Normally
soiled
Lightly
soiled
F
G
F
H
K
L
60
40
30 - 40
- 40
~ 74
~ 74
~ 56
~ 50
~ 8
~ 2
60° C programme
without pre-wash.
3 rinses and spin at
600 rpm/min.
30°- 40° C programme
without pre-wash.
3 rinses and spin at
600 rpm/min.
40° C programme
without pre-wash.
3 rinses and spin at
600 rpm/min.
-40° C programme
without pre-wash.
3 rinses and spin at
600 rpm/min.
Emptying and spin at
600 rpm/min.
Draining
Degree of
soiling
Temp.
setting (C)
Progr.
selection
Progr.
time (min.)
Programme
content