User manual

ENGLISH
• Draining and spin:
- Press the START/PAUSE button. The machine will
drain the water, then spin the laundry at the maximum
speed provided for the performed programme.
- Select spin speed by means of button 5, and
press the START/PAUSE button.
• Drain only
- Press the SKIP/RESET button (ILERLETME/IPTAL)
once, so as to cause the DRAIN light (BOÇALTMA)
to light up, then press the START/PAUSE button.
Important!
If you accidentally press the SKIP/RESET button
more than once, the display will show three blinking
dashes. To cause the washing machine to drain the
water, select any washing programme by means of
the FABRIC button, then press SKIP/RESET three
times in order to select the DRAIN position (only the
DRAIN light will remain lit).
6 OPTIONS button (SEÇENEKLER)
Press this button to select the following options:
• PREWASH (ÖN YIKAMA): select this option if you
wish your laundry to be prewashed before the main
wash (not available for wool and hand-wash cycle).
The prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics,
whereas in the programme for delicate fabrics the
water is only drained.
• SUPER RINSE (EKSTRA DURULAMA): this
option can be selected with all programmes except
the wool programme and hand wash. The
machine performs 4 rinses instead of 3. This option
is recommended for people who are allergic to
detergents, and in areas where the water is very soft.
7 QUICK WASH (HIZLI YIKAMA)
This button allows you to select the QUICK WASH
function, for laundry that is only slightly soiled (not
for wool and HAND WASH programme).
The washing time will be reduced according to the
type of fabric and the selected temperature.
8 Display
The following pieces of information are shown on the
display:
• Three blinking dashes, when a programme is
cancelled by means of the SKIP/RESET
(BAÇLAT/BEKLET) button.
The three blinking dashes will also appear when you
press the ON/OFF (AÇMA KAPAMA) button to
switch the machine on, if the previously selected
cycle has been erased.
•
Duration of washing programme in hours and
minutes, after you have selected a programme.
While the programme is running (after you have
pressed the START/PAUSE button
BAÇLAT/BEKLET), the displayed time value
decreases by one unit every minute.
• The washing machine has stopped with water in
the tub, at the end of a programme with the RINSE
HOLD (SUDA BEKLETME) option: this is indicated
by a static zero.
• The washing machine has completed the
programme: this is indicated by a blinking zero. At
the same time, the door locked light goes out. The
zero will reappear when you switch the washing
machine on, unless the previous programme has
been erased by means of the SKIP RESET
(ILERLETME/IPTAL) button.
Important!
The first time you use the washing machine,
when you switch it on, it may display a blinking zero
and give an audible warning signal. This is due to the
fact that the washing machine has performed a
washing cycle during the manufacturer’s inspection
2.05
11
132993580•EW1220/1620N•gb 07/07/03 11:22 Pagina 11