User manual

89
Operating sequence
1. Place the laundry in the drum
Open the loading door.
Place the garments to be
washed inside the drum
one by one laying them
as flat as possible. Close
the door ensuring that
the catch clicks into
place.
2. Measure out the detergent into the
dispenser drawer
Pull out the detergent
dispenser drawer from
the control panel.
Pour the detergent into
the main wash compart-
ment. Follow the deter-
gent manufacturer’s gui-
delines for the amount
required.
If you wish to carry out
the prewash, pour the amount of detergent required
into the «prewash» compartment.
3. Add the liquid additive if required.
Pour the softener, if
required, into the com-
partment marked .
Do not exceed the MAX
level.
4. Select the required option and the spin
speed.
5. Select the temperature
Press the temperature
selector dial in to pop it
out and turn it to the
required value.
6. Select the required programme and
start the machine
Plug into the mains.
Turn on the water tap.
Check that the drain hose is correctly positioned.
Press the programme
selector dial in to pop it
out and then turn it
clockwise until the pro-
gramme coincides with
the marker.
Depress the ON/OFF
button: the «mains on»
light will come on and
the machine starts ope-
rating.
7. At the end of the programme
The appliance stops automatically.
If a programme without draining of water has been
selected, drain the water before opening the door.
Wait one or two minutes before opening the door
to give the electric locking mechanism time to release
it.
Release the ON/OFF button, the mains-on light goes
out.
Turn the water tap off and unplug the machine from
the mains.
Open the loading door and remove the laundry.
Ensure that the drum is completely empty by turning it
with one hand.
Leave the door ajar for a while to eliminate the steam.
P0004
P0005
P0006
P0128
95
P0045
P0129
B