Installation guide

INDUCTION COOKTOP INSTALLATION INSTRUCTIONS
Overhead Cabinet Should Not Exceed a
Maximum Depth of 13" (83 cm)
A
30"
(76.2
cm)
Min.
Clearance
K
Min.
Recommended
|
Between
the
Top
of
the
Distance
Between
Rear
Cooking
Platform
and
the
Edge
of
Cutout
and
Bottom
of
an
Unprotected
6
Nearest
Combustible
=
49"
Wood or Metal Cabinet \ Surface Above (25.4cm)
Countertop
24" (61 cm) Min. when Bottom
of Wood or Metal Cabinet
is Protected by Not Less
Than 1/8" (0.3 cm) Flame
Retardant Millboard Covered
With Not Less Than No. 28 y
MGS Sheet Steel, 0.015" (0.4
mm) Stainless Steel, 0.024"
(0.6 mm) Aluminum or 0.020"
(0.5 mm) Copper.
J Min. From Edge of
Cooktop to Nearest
Combustible Wall
(Either Side of Unit).
It is not recommended to use
drawer underneath cooktop.
Approximate Location of Empty space is needed for
Junction Box
2¥5" (6.4 cm) Min. From installation purpose.
* Letters on this figure refer to chart Edge of Cutout to Front
on front page except for J and K. Edge of Countertop
Figure 2 ~ COUNTERTOP CUTOUT OPENING
To
eliminate
the
risk
of
MODEL
burns or fire by reaching over heated = = = =
surfaces, cabinet storage space located 30 (5.1m) 11/2" (8.8m) 30" (76.20m)
" (5.1cm) 2" (5.1cm) 36" (91.4cem)
above the cooktop should be avoided. 36"
lf cabinet storage is provided, risk can
be reduced by installing a range hood
that projects horizontally a minimum of
5" (12.7 cm) beyond the bottom of the
cabinets.
2
2
Model and Serial Number Location
The serial plate is located under the cooktop.
When ordering parts for or making inquires about
your cooktop, always be sure to include the model
and serial numbers and a lot number or letter from the
serial plate on your cooktop.
Serial plate is located
under the burner box
of cooktop.