English Complete Owner's Guide
18
Setting Surface Controls
Use the chart below to determine the suggested
setting for the type of food you are preparing when
using the cooktop.
Your induction cooktop is equipped with a Power
water or food to cooking temperature at the fastest
you up to 139% power output for a maximum of 10
minutes.
To Turn ON the Power Boost Feature:
- Press the ON OFF
- Press the “hi +” key pad and the PB will be shown
Recommended surface setting chart
Setting Type of Cooking
POWER
Start most foods; bring water to a
boil and pan broiling.
HIGH (8-HI) Continue a rapid boil; frying,
deep fat frying.
sauces and gravies; steaming
vegetables..
LOW (4- 5)
and stewing.
LOW (Lo-3)
simmering.
Suggested cooktop power
settings
Setting power boost feature
Heat may be transferred from the cookware to
the ceramic glass and the areas surrounding the
elements may become hot enough to cause burns.
The Hot Element Message Light will turn ON and
will continue to glow until the glass cooktop
has cooled down to a moderate level. The glass
surface may still be hot and burns may occur if
the glass surface is touched before the indicator
light has turned OFF.
Do not place plastic items such as salt and
pepper shakers, spoon holders or plastic
wrappings on top of the range when it is in
use. These items could melt or ignite. Potholders,
too close to the surface elements.
Figure 1
hi +
The electronic processes involved with Induction
Cooking create some unusual background noises.
These noises are normal and part of the Induction
Cooking process.
Please note that these noises are more noticeable
noises are not part of normal Induction Cooking.
Operational noises