English Complete Owner's Guide

36
SettingYourPreferences
Userpreferences

options. This feature enables you to control the various
options of the electronic controls. This menu features


Clock display or No-Clock display, 12 Hours Time

Adjusting the oven temperature. The User Preferences
menu is only available when the oven is not being
used (not cooking).
TobrowsethroughtheUser
Preferences menu:
1. Press USERPREF to bring up the User
Preferences menu.
2. Press USERPREF
again to browse
through the menu pages.
3. Press
+
hi
or
-
lo
to toggle between the available
options.
4. Press START
while the chosen option is
on display to change.
5. Press CANCEL

to the standard oven display.
UserPreferencesmenuitems:
• CLO 12:00; Setting the clock.
• CLO on; Clock on/off.
• CLO 12hr; 12/24 hour time of day display.
 UPO; Adjusting oven temperature.
 F-C F ; Fahrenheit / Celcius display.
 AUd; Audio on/off and volume.
 E S on ; 12 hour Energy Saving on/off.
 rSt ; Reset to default factory settings.
Setting the clock - time of day
Setting clock display- on or off
The clock may be set for 12 or 24 hour time of day
operation (see advanced settings section). The
clock has been preset at the factory for the 12 hour

the power supply to the range has been interrupted,
the display will show “CLO 12:00”. The clock must
be set before the oven can be used.
When power to the unit has been interrupted, “12:00”

in this case, skip step 1 in the example below and
follow steps 2 and 3.
To set the clock (example for 1:30):
1. Press USERPREF until you get to the CLO
12:00 menu page.
2. Press
1
3
0
pads to set the time of day to
1:30. The pads
+
hi
or
-
lo
can also be pressed to
raise or lower the actual time displayed.
3. Press START
to accept the changes and go
back to user preferences menu display.
The oven control can be programmed to display
the time of day or not. The oven has been preset at
the factory to display the time of day.
Changing clock display between ON
and OFF:
1. Press USERPREF until you get to the
CLO on menu page.
2. Press
-
lo
or
+
hi
to toggle between displaying or
hiding the clock.
3. Press START
to accept the changes and
go back to user preferences menu display.