English Complete Owner's Guide
46
To lubricate the glide rack:
1. Remove the rack from the oven and place
newspaper or scrap cloth. Fully extend the rack.
2. Wipe away debris and crumbs from the glide
track using a cloth or sponge.
4. Extend and return the glide rack several times
along the tracks to distribute the lubrication.
5. Turn glide rack over. Shake graphite lubrication
very well before applying. Place four drops of
graphite lubrication along the tracks. Repeat on
both sides of the glide rack.
6. Extend and return the glide rack several times
along the tracks to distribute the lubrication.
7. Apply a thin layer of cooking oil to the outer frame
frame sides lightly lubricated allows the entire
rack to slide easily when changing rack positions.
8. Replace rack in oven right-side up.
Care and Cleaning
Caring for your porcelain
enameled glide racks
Handle oven racks only when they are cool. After
cooking or after the self clean cycle, racks will be
very hot and can cause burns.
IMPORTANT
It is recommended to remove all racks from the
oven during self-clean cycles, but porcelain racks
may be left in the oven if they are soiled. After a
self clean cycle, or anytime the gliding is rough,
the glide racks should be treated with graphite
lubrication.
oil-based lubrication products on the glide rack
extension tracks. Use only the graphite lubrication
in this area. To order graphite lubrication, contact
your installer, servicer or dealer.
It is important that the parts of the rack that contact
the oven sides always have a light coating of
vegetable oil. Apply a thin layer of vegetable oil to
the sides of the rack after every self-clean cycle
in the oven.
3. Shake graphite lubrication very well before
applying. Place four drops of graphite lubrication
below). Repeat on both sides of the glide rack.