Instructions / Assembly

ManualsBrandsElectrolux ManualsCooktopWave-Touch 30 in. 4.6 cu. ft. Induction Slide-In Range with Self-Cleaning Convection Oven in Stainless Steel

NOTICE - This service data sheet is intended for use by persons having electrical

and mechanical training and a level of knowledge of these subjects generally

considered acceptable in the appliance repair trade. The manufacturer cannot

be responsible, nor assume any liability for injury or damage of any kind arising

from the use of this data sheet.

SAFE SERVICING PRACTICES

To avoid the possibility of personal injury and/or property damage, it is important

that safe servicing practices be observed. The following are examples, but without

limitation, of such practices.

1. Before servicing or moving an appliance remove power cord from electrical outlet,

trip circuit breaker to OFF, or remove fuse.

2. Never interfere with the proper installation of any safety device.

IMPORTANT

DO NOT REMOVE THIS BAG

OR DESTROY THE CONTENTS

WIRING DIAGRAMS AND SERVICE

INFORMATION ENCLOSED

REPLACE CONTENTS IN BAG

p/n 807880704 Rev A (1503)

SERVICE DATA SHEET

30” INDUCTION COOKTOP

3. GROUNDING: The standard color coding for safety ground wires is GREEN or

GREEN WITH YELLOW STRIPES. Ground leads are not to be used as current

carrying conductors. It is extremely important that the service technician

reestablish all safety grounds prior to completion of service. Failure to do

so will create a potential safety hazard.

4. Prior to returning the product to service, ensure that:

• All electric connections are correct and secure.

• All electrical leads are properly dressed and secured away from sharp edges,

high-temperature components, and moving parts.

• All uninsulated electrical terminals, connectors, heaters, etc. are adequately

spaced away from all metal parts and panels.

• All safety grounds (both internal and external) are correctly and securely

reassembled.

Indicated % Power Notes

Lo 3 Keep Warm

1.2 3.5 -

1.4 4 -

1.6 4.5 -

1.8 5 -

2 5.5 -

2.2 6 -

2.4 7 -

2.6 8 -

2.8 9 -

3 10.5 -

3.5 13 -

4 15.5 -

4.5 18 -

5 21 -

5.5 25 -

6 31 -

6.5 38 -

7 45 -

8 54 -

9 64 -

Hi 100 -

Pb 125-141 Boost

Electronic Surface Element Control (ESEC)

This cooktop is equipped with an Electronic Surface Element Control (ESEC),

which precisely controls the smoothtop cooking elements at multiple settings. For

the user, the elements are operated by pressing the touch pads located on the

control panel for the desired settings. The control settings are shown in 2-digit

displays.

Hot Surface display message - If any of the induction elements are hot, the hot

surface message (HE) will display and remain ON until the cooktop cools.

ESEC lockout feature - The Cooktop Lockout features will not operate when

a surface element is ON. Conversely, the surface elements controlled by the

ESEC will not operate when Cooktop Lockout mode is active. When the control is

in Cooktop Lockout mode, will appear in the display to signify that the surface

heating elements are locked out.

* Please note: Electronic boards are very sensitive to static electricity. Static elec-

tricity can permanently damage electronic boards. Before handling these parts, be

sure to drain static electricity from your body by properly grounding yourself.

THERMAL CUT-OUT

COUPE-CIRCUIT THERMIQUE

GENERATOR BOARD LEFT

CARTE GENERATEUR GAUCHE

GENERATOR BOARD RIGHT

CARTE GENERATEUR DROITE

BC3

B81

BC4

B71

TAB1

TAB2

BC1

TAB102

TAB101

BC5

BPL1

BPL2

BPN2

BPN1

BPE03

BC3

B81

BC4

B71