Use and Care Manual

PLEASE NOTE-ANY one of the incorrect conditions listed above in Fig. 1 may be detected by

the sensors located below the ceramic cooktop surface. If the cookware does not meet any of

theseconditions,oneormoreoftheCookingZoneswillnotheatindicatedbytheturnedoffcircle

surrounding the digital display for that affected zone. Correct the problems before attempting to

reactivate the cooktop.

INCORRECT

CORRECT

• Cookware not centered on Cooking

Zone surface.

• Cookware centered correctly on

Cooking Zone surface.

• Curved or warped pan bottoms or

sides.

• Flat pan bottom & straight sides.

• Pan does not meet the minimum



used.

•     



Cooking Zone.

• Pan bottom rests on cooktop trim

or does not rest completely on the

cooktop surface.

• Pan rests completely on the Cooktop

surface.

• Heavy handle tilts pan. • Pan is properly balanced.

Fig. 1

Surface Cooking

Cookware recommendations