User manual

ENGLISH
17
Problem Possible cause
The machine vibrates or is noisy:
●
Check that all the transit bolts and packing have
been removed.
●
Check that the machine is not resting against
anything.
●
Check that the support feet are resting firmly on
the ground.
●
Check that the laundry is evenly distributed in the
drum.
●
Maybe there is very little laundry in the drum.
The door will not open:
●
The programme is still running.
●
The door lock has not yet been released.
●
There is water in drum.
Water is not visible in the machine:
●
The machine, which is the result of modern
technology, runs in a very economical way with
low water consumption. Performance is
nevertheless excellent.
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning, make
a note of the model, serial number and purchase
date of your machine: the Service Centre will require
this information.
Mod. ..........
Prod. No. ...........
Ser. No. .........
M
o
d
.
..
.
.
.
.
.
.
.
.
P
r
o
d
.
N
o
.
.
.
.
.
.
.
.
.
.
.
.
S
e
r
.
N
o
.
.
.
.
.
.
.
.
.
.
P0042 BD
Spinning starts late or the machine does
not spin:
● The electronic unbalance detection device has cut
in because the laundry is not evenly distributed in
the drum. The laundry is redistributed by reverse
rotation of the drum. This may happen several
times before the unbalance disappears and
normal spinning can resume. If, after 6 minutes,
the laundry is still not evenly distributed in the
drum, the machine will not spin. In this case,
redistribute the load manually and select the spin
programme.
● The machine makes an unusual noise:
● The machine is fitted with a commutator motor
which makes an unusual noise compared with
other traditional machines. This motor enables a
softer start to the spin and controls the increase in
spin speed better. In this way, machine
performance is improved.
132995740 EW 559-659 F gb.qxd 3/26/02 12:05 PM Pagina 17 (Nero/Process Black pellicola)