User manual

8
USE
Control panel
1
234 56 7 8
1 Programme chart
2 No spin button
3 “Half load” button
4 Rinse hold (Anti-crease) button
5 ON/OFF button
6 Operating pilot light
7 Temperature selector dial
8 Programme selector dial
Description of the controls
1 Programme chart
There is a programme guide inside the handle of
the detergent dispenser drawer.
2 No spin button
Depress this button when washing particularly
delicate items to exclude all the spinning
phases.
3 “Half load” button
Press this button when a reduced amount of
laundry (cotton and linen) is washed (max.
2.5 kg), in order to reduce the water
consumption in the rinses (the machine will
perform 2 rinses instead of 3).
4 Rinse hold button
Press this button to make the machine stop with
water in the drum after the synthetic or delicate
wash cycles.
This prevents any creasing which may take place if
the clothes are left damp in the drum. When it is
convenient for you to empty the machine, simply
press this button again so that the machine can
proceed to drain and spin, or turn the dial to the
drain programme "N".
5 On/Off button
Press this button to start the machine: the
«pilot» light will come on. The same button is
used to switch the machine off.
Before selecting a programme or changing
an ongoing programme the machine must be
switched off by depressing the same button.
6 Operating pilot light
This light is on whilst the machine is operating
and goes out at the end of the programme.
7 Temperature selector dial
Turn this dial to select the washing temperature.
Position : cold wash.
8 Programme selector dial
To select the required programme, turn this dial
clockwise until the programme letter is exactly
opposite the pointer:
- red sector for cotton and linen
- blue sector for synthetics, delicate fabrics,
woollens.