User manual

which you want the washing cycle to
be finished.
The display shows the number of hours
you set (e.g. ) and the indicator above
the button is on to show that his
option is active.
2. Touch the button :
• The door is locked.
• The appliance starts the
countdown.
• When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the Finish In option
before you touch the button
. After touching the
button you can only
cancel the Finish In option.
To cancel the the Finish In option:
a. Touch the button to set the
appliance to pause. The indicator
of button
flashes.
b. Touch the button
until the
indicator above this button goes
off.
Touch the button
again to
start the programme
immediately.
10.9 Interrupting a programme
and changing the options
You can change only some options
before they operate.
1. Touch .
The indicator of this button flashes.
2. Change the options. If you change
any option the Finish In option (if set)
will be disabled.
3. Touch again.
The programme continues.
10.10 Cancelling a programme
1. Press the button for some
seconds to cancel the programme
and to deactivate the appliance.
2. Press the same button again to
activate the appliance. Now, you can
set a new washing programme.
The appliance does not
drain the water. The water
left in a drum can be used
for the next washing cycle.
10.11 Opening the door
While a programme (or the ) operates,
the appliance door is locked. The
indicator is on.
CAUTION!
If the temperature and level
of the water in the drum are
too high, you cannot open
the door.
To open the door during the first
minutes of the cycle (or when the
operates) :
1. Touch the button to pause the
appliance.
2. Wait until the indicator goes off.
3. You can open the door.
4. Close the door and touch the button
again. The programme (or the
) continues.
10.12 At the end of the
programme
• The appliance stops automatically.
• The acoustic signal operates (if it is
activated).
• In the display
comes on.
• The indicator of the button goes
off.
• The door lock indicator goes off.
• You can open the door.
• Remove the laundry from the
appliance. Make sure that the drum is
empty.
• Press the button for some seconds
to deactivate the appliance.
• Close the water tap.
www.electrolux.com14