User manual
Table Of Contents
- CONTENTS
- 1. SAFETY INFORMATION
- 2. SAFETY INSTRUCTIONS
- 3. PRODUCT DESCRIPTION
- 4. CONTROL PANEL
- 5. PROGRAMME CHART
- 6. CONSUMPTION VALUES
- 7. OPTIONS
- 8. SETTINGS
- 9. BEFORE FIRST USE
- 10. DAILY USE
- 10.1 Loading the laundry
- 10.2 Using detergent and additives
- 10.3 Detergent compartments
- 10.4 Liquid or powder detergent
- 10.5 Activating the appliance
- 10.6 Setting a programme
- 10.7 Starting a programme without the Finish In option
- 10.8 Starting a programme with the Finish In option
- 10.9 Interrupting a programme and changing the options
- 10.10 Cancelling a programme
- 10.11 Opening the door
- 10.12 At the end of the programme
- 10.13 AUTO-OFF option
- 11. HINTS AND TIPS
- 12. CARE AND CLEANING
- 13. TROUBLESHOOTING
- 14. TECHNICAL DATA
12.6 Cleaning the inlet hose and the valve filter
1.
1
2
3
2.
3. 4.
45°
20°
12.7 Frost precautions
If the appliance is installed in an area
where the temperature can be less than
0 °C, remove the remaining water from
the inlet hose and the drain pump.
Do this procedure also when
you want to do the
emergency drain.
1. Disconnect the mains plug from the
mains socket.
2. Close the water tap.
3. Remove the water inlet hose.
4. Remove the drain hose from the rear
support and unhook it from sink or
spigot.
1
2
5. Put the ends of the drain and inlet
hose in a container. Let the water
flow out of the hoses.
6. When no more water flows, install the
inlet hose and the drain hose again.
WARNING!
Make sure that the
temperature is more than 0
°C before you use the
appliance again. The
manufacturer is not
responsible for damages
caused by low temperatures.
www.electrolux.com18