User manual

- 7 -
6 Button ”Start/Pause”
T
his button has two functions:
S
tart:
P
ress the button in order to start the required
programme. The corresponding indicator lamp
i
s lit. The indicator lamp for ”Locked” in the pro-
gramme progress display is lit and the door is
l
ocked.
Pause: To interrupt a programme which is running, press
the button. The corresponding indicator lamp
starts to flash. To continue the programme, press
the button again.
7 Programme progress display
When you select a wash programme, the light corres-
ponding to the various phases of the programme goes on.
When the programme has started, the display will allways
show which section of the choosen programme the
machine is performing, or if is finished.
= pre-wash/main wash
= rinses
= spin
= end
= locked
The light ”Waschen” comes on when the machine is
performing the washing phase (main wash). If you have
choosen the ”Vorwäsche” option by pressing that button,
the light will be on during the pre-wash phase too.
When the ”Ende” light is lit, the programme is finished.
The door can be opened and the laundry can be removed.
The light ”Tür” indicates if the door can be opened:
- the light is lit: the door can not be opened
- the light is out: the door can be opened
- the light flashes: the door can soon be opened
8 Spin speed or function
With this selector you can reduce the final spin speed or
select the ”Kein Schleudern” (no spin) option. The speeds
are applied for the ”white-” and ”coloured” programmes.
● The position 1100 is equivalent to 900 rpm/min
for the synthetic and wool programmes and 700
rpm/min for the delicate wash programme.
● The position 500
is equivalent to
500 rpm/min for
the synthetic and wool programmes and 450 rpm/
min for the delicate wash programme.
”Kein Schleudern”, by selecting this option all the
spinning phases are excluded. To be used for
extremely delicate material. The machine will add
3 extra rinses to the cotton programmes and 1
extra rinse to the synthetic programmes.
”Spülstopp” (rinse hold), when selecting this position the
water of the last rinse is not drained to prevent the laundry
from creasing. The lights ”Ende” and ”Tür” on the programme
progress display are lit when the programme is finished
and indicating that the water must be drained before the
door can be opened.
To drain the water:
1. Turn the programme selector to the ”Aus” (reset)
position.
2. Choose the programme ”Pumpen” (draining) or
”Schleudern” (spinning). You can reduce the
spin speed by turning the selector.
3. Press in the Start/Pause-button.
9 Programme selector
The machine has five programme sections, four for
different wash recommendations:
Koch-/Buntwäsche (White/coloureds wash)
Pflegeleicht (Synthetic wash)
Feinwäsche (Delicate wash)
Wolle (Wool)
and one for the special programmes
Spülen (Rinses)
Pumpen (Drain)
Schleudern (Spin)
Turn the programme selector clockwise or anticlockwise
to select the programme and temperature according to
the care label, or one of the special programmes.
= cold, the water is not heated
= resets, cancels the programme, switches the
machine off.
If you turn the programme selector to an other
programme when the machine is working, the
lights in the programme progress display starts
to flash. The machine will not perform the new
selected programme.
When the programme is finished, the pro-
gramme selector must be turned back to the
reset position.
Kalt
Aus