User manual

30 electrolux installation
6. Fill the smaller upper hole and the two
large ones with the corresponding
plastic plug caps supplied in the bag
containing the instruction booklet that
you will find inside the drum.
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around
the machine is not impeded by
carpets, rugs etc. Check that the
machine does not touch the wall or
other kitchen units. Level the washing
machine by raising or lowering the feet.
The feet may be tight to adjust as they
incorporate a self locking nut, but the
machine MUST be level and stable.
If necessary, check the setting with a
spirit level.
Any necessary adjustment can be
made with a spanner.
Accurate levelling prevents vibration,
noise and displacement of the machine
during operation.Never place
cardboard, wood or similar materials
under the machine to compensate for
any unevenness in the floor.
BI0013
Water inlet
Do not place the inlet hose
downwards. Angle the hose to the
left or right depending on the
position of your water tap.
Connect the hose to a tap with a 3/4”
thread. Always use the hose supplied
with the appliance.
P1088
HEC0028QL
HEC007S
132962580_EN.qxd 08/07/2008 14.06 Pagina 30