User manual

Should the appliance power supply
cable need to be replaced, this
must be carried out by a Service
Centre.
Permanent connection
In the case of a permanent connection it
is necessary that you install a double
pole switch between the appliance and
the electricity supply (mains), with a
minimum gap of 3 mm between the
switch contacts and of a type suitable
for the required load in compliance with
the current electrical regulations. The
switch must not break the yellow and
green earth cable at any point. This
operation must be performed by a
qualified electrician.
32 electrolux installation
132962580_EN.qxd 08/07/2008 14.06 Pagina 32