EWF1041ZDWA WASHING MACHINE USER MANUAL WI-FI CONNECTIVITY SETUP 2 48
www.electrolux.com IMPORTANT INFORMATION THAT MAY IMPACT YOUR MANUFACTURER’S WARRANTY Adherence to the directions for use in this manual is extremely important for health and safety. Failure to strictly adhere to the requirements in this manual may result in personal injury, property damage and affect your ability to make a claim under the Electrolux manufacturer’s warranty provided with your product. Products must be used, installed and operated in accordance with this manual.
CONTENTS 1. SAFETY INFORMATION............ 4 1.1 Conditions Of Use...................... 4 1.2 Child Safety................................ 5 1.3 General Safety........................... 5 1.4 Installation.................................. 6 1.5 Use............................................. 6 2. PRODUCT DESCRIPTION.............. 7 2.1 Parts........................................... 7 2.2 Accessories................................ 8 2.3 Load Sensor............................... 9 2.
www.electrolux.com 1. SAFETY INFORMATION 1.1 Conditions Of Use This appliance is intended to be used in household and similar applications such as: ● ● ● ● ● staff kitchen areas in shops, offices and other working environtment; farm houses; by clients in hotels, motels, and other residential type environments; bed and breakfast type environtments; areas for communal use in blocks of flats or in launderettes.
1.2 Child Safety ● This washing machine is not intended for use by young children or infirm persons without supervision. ● Young children should be supervised to ensure that they do not play with the appliance. ● The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach. ● Keep all detergents in a safe place out of children’s reach. Make sure that children or pets do not climb into the drum.
www.electrolux.com ● Under no circumstances should you For safety reasons do not use double adaptors, extension cords and multi-plug adapters. attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts. 1.4 Installation 1.5 Use ● This appliance is heavy. Care should ● Only wash fabrics which are designed to be machine washed.
2. PRODUCT DESCRIPTION 2.
www.electrolux.com Detergent dispenser with AutoDose tanks and manual compartments For more informations (see page 19) Level Adjustment Feet Transit Bolt (when remove) Door (when open) for more informations, see page 19 Drum Lifter Stainless Steel Washing Drum 2.2 Accessories Drain Pump Filter (when open) Drain Pump Filter Transit bolts must be removed before using the appliance.
ENGLISH 2.3 Load Sensor This machine has “Load Sensing Device” which shows how much load you put in the machine and maximum load recommended for selected wash program. The display shows these indicators when the door is open. The weight shown on display is an approximate weight only. For correct operation of the load sensor, activate the appliance and set a wash program BEFORE loading the laundry in the drum. –– The display will show “ ” when max limit is reached for selected program.
www.electrolux.com 2.4 The Autodose Technology (Autodosing) Introduction Using the right amount of detergent and fabric softener not only improves the wash performance of your machine it is also beneficial for your clothes and environment by avoiding excessive detergent usage. This appliance is equipped with an automatic dosing system enabling the machine to automatically dispense the right amount of detergent and fabric softener for selected wash cycle based on laundry weight.
3. CONTROL PANEL 3.
www.electrolux.com 3.2 Program Chart Program; Temperature range Max. Max. Load Type of load and soil level Spin (Dry Clothes) Speed Cottons; Cold to 90°C 1400 rpm 10 kg Mixed; Cold to 60°C 1200 rpm 4 kg Synthetic or mixed fabric items. Bedding; Cold to 60°C 800 rpm 3 kg Special program for one synthetic blanket, duvet, bedspread and so on. Energy Saver; Cold and 40°C1) 1400 rpm 10 kg White and colourfast cotton.
Program; Temperature range Max. Max. Load Type of load and soil level Spin (Dry Clothes) Speed Wool ; Cold to 40°C 1200 rpm 2 kg Specially tested program for woollen garments bearing the “Pure new woollen, non-shrink, machine washable” label. Delicates; Cold to 40°C 1200 rpm 4 kg Delicate fabrics such as acrylics, viscose, polyester items. Favourite – – Recall you favourite program.
www.electrolux.com 3.
AutoDose Liquid Detergent Touchpad For activating and deactivating the automatic detergent dosing refer to “5.2 Detergent dispenser with AutoDose tanks and manual compartments” on page 19. AutoDose Fabric Softener Touchpad For activating and deactivating the automatic fabric softener loading Refer to “5.2 Detergent dispenser with AutoDose tanks and manual compartments” on page 19.
www.electrolux.com Extra Rinse Touchpad Prewash Touchpad This option is recommended for people who are allergic to detergents, and in areas where the water is very soft. Use this option to add two rinse phases to a program. Select this option if you wish your laundry to be pre-washed before the main wash. Use this option for heavy soil, especially if containing sand, dust, mud and other solid particles. This option increases the program duration.
• At the end of the Vapour cycle, the clothes will be warmer, softer and detached from the drum. If Vapour option is selected, rinse temperatures will be elevated. During a vapour cycle, you may notice vapour exiting from the drain hose of the washing machine, this is normal and there is no cause for alarm. 3.5 Settings Save Favourite ( ) Program Program settings that are frequently used can be saved (e.g. Cotton, 60°C, 1200 rpm, with Prewash and Vapour).
www.electrolux.com 3.6 Start/Pause ( ) and Add Clothes ( ) Touchpad This touchpad has 2 functions: 1. Start/Pause ( ) After you have selected the desired program and options, press this touchpad to start the machine. If you have selected a “Delay End” option, the countdown will begin and will be shown on the display. To interrupt a program which is running, press this touchpad to pause the machine, the Start/Pause pilot light flashes. 2.
5. DAILY USE 5.1 Loading The Laundry 1. Turn the water tap on. 2. Connect the main plug to the main socket. 3. Press the On/Off button to turn on the washing machine. Turn the knob to set a program. The washing machine will propose a temperature and automatically select the spin value provided for the program you have chosen. The selector knob can be turned either clockwise or counter-clockwise. 4. Check and remove objects (if there are any) that could be trapped in the fold. 5.
www.electrolux.com The pre-set dosages are 50 ml for detergent tank and 25 ml for fabric softener tank: the optimal configuration to meet majority of use condition. However, under extreme conditions (very soft or very hard water) and particular type of detergent (such as super concentrated), we recommend to adjust the pre-set dosage by following the instruction given on detergent and fabric softener container: e.
Filling the detergent and additives on AutoDose system Please read “Detergents Type And Quantity Of Detergent” on page 29. 4. Gently pour only liquid softener in the AutoDose fabric softener tank . Fill up to the maximum indicated level . We recommend that you do not exceed the maximum indicated ). level ( 1. Open the detergent dispenser. 5. Close the AutoDose cover lid. 6. Gently close the detergent dispenser by pushing all the way in. 2. Lift up the AutoDose cover lid. 1. Standard Mode 3.
www.electrolux.com To Select Detergent Amounts (by using Electrolux Life App) If you have enabled the fine-tuning feature in the App to allow it to be available on the control panel, pressing on the AutoDose Detergent ( ) touchpad will toggle through the following options: Normal dosage (default) • • A little more detergent • A little less detergent 2.
Detergent 2 - Secondary compartment, normal dosage Detergent 2 - Secondary • compartment, a little more detergent Detergent 2 - Secondary • compartment, a little less detergent • Fine-tuning settings is not “permanent”, and will return to normal dose after the cycle ends. 3. Link Mode (by using Electrolux Life App) In Link Mode, both compartments are filled with the same detergent. You can toggle On/Off dosing of AutoDose detergent.
www.electrolux.com 5. Press Softener touchpad to select configure softener dosage. Touch the “Temp” touchpad repeatedly to increase and “Spin” touchpad to reduce. Minimum step is 1 ml (you can press and hold touchpad to increase the increment to 10ml/step). 6. To save and exit configuration mode, press and hold “Temp” and “Spin” touchpads combination again for 3 seconds or you can turn the knob to any position.
3. Put the powder detergent in the compartment . If using liquid detergent, make sure special container is inserted. 4. If desired, pour the fabric softener in the compartment . 5. Gently close the detergent dispenser by pushing all the way in. Manual filling the liquid detergent 1. Insert the special container for liquid detergent. 3. Gently close the detergent dispenser by pushing all the way in.
www.electrolux.com 5.4 Starting A Cycle ( ) 5.7 Changing The Options To start a program, press the Start/Pause touchpad. The corresponding pilot light will stop flashing and a default program duration will be displayed on the screen. After approx. 15 minutes from the start of a program: − The appliance will automatically adjust the selected program duration according to the type and size of the load. − The display will show adjusted program duration.
5.9 At The End Of The Program − − − − − − − − To drain the water: The appliance stops automatically. The acoustic signal will operate. The display will show “ ”. The indicator of the touchpad Start/Pause goes off. The door lock indicator “ ” goes off. Remove the laundry from the appliance. Make sure that the drum is empty. Keep the door partly open, to prevent the mildew and odours. Turn off the water tap.
www.electrolux.com 6. WASHING HINTS 6.1 Sorting The Laundry Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. 6.2 Temperatures Temp Soil level 90°C For normally soiled white cottons and linen (e.g. teacloths, towels, tablecloths, sheets...). 60°C For normally soiled, colourfast 50°C garments (e.g. shirts, night dresses, pajamas....
Stubborn stains may not be removed by just water and detergent. It is therefore advisable to treat them prior to washing. Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water. Oil based paint: moisten with benzine stain remover, lay the garment on a soft cloth and dab the stain; treat several times.
www.electrolux.com Not enough detergent causes: the washload to turn grey, greasy clothes. Too much detergent causes: oversudsing, reduced washing effect, inadequate rinsing. Use less detergent if: you are washing a small load, the laundry is lightly soiled, large amounts of foam during washing. 7. INTERNATIONAL WASH CODE SYMBOLS These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Max. wash Max. wash Max. wash Max.
8. CARE AND CLEANING WARNING! You must DISCONNECT the appliance from the electricity supply, before you can carry out any cleaning or maintenance work. 8.1 External Cleaning Clean the appliance only with soap and warm water. Fully dry all the surfaces. CAUTION! Do not use alcohol, solvents or chemical products. 8.2 Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine.
www.electrolux.com CAUTION! Do not use sharp or metal brushes and sponges. 6. Turn the dispenser up side down and open the bottom cover as indicated in the picture. 3. Open the drain plugs of each tank and empty them into a sink. 4. Press the catch on the back as indicated in the picture and lift up the top cover to remove it. 7. Make sure that all detergent residue is removed from the conveyor. Use only soft damp cloth. 8.
WARNING! If some residues remain on the back area of tanks, soak detergent drawer in a warm water. Do not use tools to clean it. Before soaking, remove the handle by pressing the red button and slide the handle as indicated in the picture. To restore the functionality, refill tanks with detergent and softener. If you place a wrong additives in the tanks, you can easily recover it by using the drain plug on both side of the drawer.
www.electrolux.com WARNING! ● Disconnect the mains plug from the mains socket. ● Do not remove the filter while the appliance is operating. Do not clean the drain pump if the water in the appliance is hot. The water must be cold before you clean the drain pump. 3. When the container is full of water, put the drainage duct back again and empty the container. Do step 2, 3 again and again until no more water flows out from the drain pump. To clean the drain pump: 1. Open the drain pump door. 2.
5. Remove fluff and objects from the pump (if there are any). 8. Put the filter back into the housing with exposed section facing up. Make sure that you correctly tighten the filter to prevent leakages. Guide 6. Make sure that the impeller of the pump can turn. If this does not occur, contact the service centre. 9. Close the drain pump door. 7. Clean the filter under the water tap. 8.
www.electrolux.com 3. Clean the filter in the inlet hose with a stiff brush. Clean the filter under the water tap. 4. Remove the inlet hose behind the appliance. Install the valve filter back to the housing. 5. Use a suitable tool pulling filter from the valve (eg. long nose pliers) as picture. 6. Install the inlet hose again. Make sure that the couplings are tight to prevent leakages. 7. Open the water tap.
8.8 Frost Precautions If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. Emergency Drain 1. Disconnect the main plug from the main socket. Turn off the water tap. 2. Remove the water inlet hose. 3. Remove the drain hose from the rear support and unhook it from sink or spigot. 4. Put the end of the drain and inlet hose in a container. Let the water flow out of the hoses. 5.
www.electrolux.com 9. TROUBLESHOOTING 9.1 Possible Failures Alarm Code: Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please check troubleshooting. Once the problem has been eliminated, press the Start/Pause button to restart the program. If after all checks, the problem persists, contact your local Service Centre. WARNING! Deactivate the appliance before you do the checks.
Malfunction Machine does not empty and/or does not spin: There is water on the floor: Unsatisfactory washing results: The door will not open: Machine vibrates or is noisy: Possible cause Solution The drain hose is squashed or kinked. (Error code: ) Check the drain hose connection. The drain pump is clogged. (Error code: ) Clean the drain filter. The option “Rinse Hold” has been selected. Press Start/Pause touchpad to drain the water or select spin program.
www.electrolux.com Malfunction Machine vibrates or is noisy: Cycle time longer than displayed: Possible cause Solution The laundry is not evenly distributed in the drum. Pause the machine and redistribute laundry manually. There is very little laundry in the drum. Load more laundry. Unstable floors eg. wooden floors. Refer to relevant paragraph in “Positioning” section. Detergent over dose. Reduce the detergent quantity or use another one.
If you are unable to identify or solve the problem, contact our service centre. Before calling service centre, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information. 9.2 Emergency Door Opening In case of power failure or appliance failure, the appliance door remains locked. The wash program continues when power is restored. If the door remains locked in case of failure, it is possible to open it using the emergency unlock feature.
www.electrolux.com 10. TECHNICAL DATA Dimensions (Height / Width / Depth) 85 X 60 X 65.9 cm Power supply (Voltage / Frequency) 220-240 V~ / 50 Hz Total power absorbed 2100 W Water supply pressure (Maximum / Minimum) Program Maximum dry clothes capacity Spin speed (Maximum / Minimum) Cottons Mixed Bedding Energy Saver Vapour Refresh Tub Clean App Program Spin Rinse + Spin Sports Quick 15 Daily 60 Wool Delicates Favourite 0.8 MPa / 0.05 MPa Max. Capacity 10 kg 4 kg 3 kg 10 kg 1.
2. Remove the cardboard top. 3. Remove the polystyrene packaging materials. 4. Remove the plastic bag which cover the machine. 6. Put one of the polystyrene packaging elements on the floor behind the appliance. Carefully put down the appliance with the rear side on it. Make sure not to damage the hoses. 7. Remove the polystyrene base. 5. Open the door. Remove all the items from the drum. 8. Pull up the appliance in vertical position. 9.
www.electrolux.com A 10. Remove the three transit bolts. 11. Pull out the plastic spacers. 11.2 Positioning It is important that your washing machine stands firm and leveled on the floor to ensure correct operation. The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to avoid restricting the washing machine door. Use a spirit level on the top and side of the washing machine to check the levels. 12.
Loosen or tighten the feet to adjust the level. A correct adjustment of the appliance level prevents vibration, noise and the movement of the appliance when in operation. clockwise “DOWN” 11.3 Water Inlet Connect the water inlet hose to a tap with 3/4” BSP thread. Use the hose supplied with the washing machine. DO NOT USE OLD HOSES. check counter clockwise “UP” When the washing machine is levelled, try to rock it from corner to corner.
www.electrolux.com In a sink, drain pipe branch. Fitting Hose Guide 1. Pull apart to insert hose. 450 approx. 46 Hose Guide bend hose pull hose 2. Adjust length to suit trough. This branch must be above the trap so that the bend is at least 60 cm above the ground. Max. 90 cm Min. 60 cm Push the drain hose onto the spigot and secure with a clamp, ensure a loop is formed in the drain hose to prevent waste from the sink entering the appliance.
11.5 Electrical Connection This machine is designed to operate on a 220-240 V, single-phase, 50 Hz supply. “An incorrect power supply may void your warranty.” Check that your domestic electrical installation can take the maximum load required (2.1 kW), also taking into account any other appliances in use. Should the appliance power supply cable need to be replaced, this shall be carried out by our Service Centre. When the appliance is installed, the power supply cable must be easily accessible.
www.electrolux.com 13. WI-FI CONNECTIVITY SETUP This chapter describes how to connect the smart appliance to the Wi-Fi network and to link it to a mobile devices. By this functionality you can monitor and control your laundry appliance from your mobile devices. To connect the appliance to enjoy the full range of features and services you need: • Wireless network at home with internet connection enabled. • Mobile device connected to wireless network. Frequency 2.
For iOS devices, you will then be prompted go to “SETTINGS” on your phone and select your Home Wi-Fi, then return to the Electrolux Life App. If the connectivity is configured, (Access Point) symbol is off and the will stop blinking and lit steadily icon to confirm that the configuration was successful. Every time you switch the washing machine on, the machine takes 45 seconds to connect to the network automatically. When indicator stops blinking the the connection is ready.
www.electrolux.
WARRANTY 51
G0026058-001-A17711805
