User manual

Liquid or powder detergent

1. 2.

• Position A for powder detergent (factory setting).

• Position B for liquid detergent.

When you use the liquid detergent:

– Do not use gelatinous or thick liquid detergents.

– Do not put more liquid then the maximum level.

– Do not set the prewash phase.

– Do not set the delay start.

9.3 Setting a programme

Turn the programme knob and set

the programme:

–

The indicator of the

flashes.

If necessary, change the temperature

and the spin speed or add available

options. When you activate an option,

the indicator of the set option comes

on.

If you set something incorrect, the

indicator

flashes red.

9.4 Starting a programme

without the delay start

Press the :

• The indicator of the

stops to flash

and stays on.

• The programme starts, the door locks,

the indicator

is on

• The drain pump can operate for a short

time when the appliance fills water.